Concepts™ is a leading-edge solution that breaks the mold on traditional serving lines.
Let your imagination run wild, break the mold and be inspired!
Start by using standard components. Add options, accessories and finishes that meet your needs. End with a serving solution that has the look and feel of a custom solution but without the custom price tag. That’s the new Concepts line by Delfield. It’s a whole new wave of serving line equipment.
Heavy duty stainless steel top
Reinforced stainless steel front and rear removeable panels
Flush mounted pans
Heavy duty base support structure
Standard on 6" legs
Individual .5" stainless steel drains
Thermostat for temperature control
High density foamed in place environmentally friendly, Kyoto Protocol compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming potential) polyurethane keeps energy costs low
Please Note : You may require Adobe Acrobat Reader to view these documents.
Self-contained LiquiTec® cold pan serving counter
Width x Depth x Height
(167.64 cm x 91.44 cm x 91.44 cm)
is constructed of 0.75" Melamine reinforced front and rear panels with 22 gauge stainless steel skin and 1" polyethylene horizontal rib supports. Horizontal brace on rear is constructed of 18 gauge galvanized Steel. The exterior ends are unfinished. Ends are supported by 12 gauge galvanized steel front to rear braces.
is constructed of 14 gauge stainless steel. Horizontal top supports on front and rear are constructed with 18 gauge galvanized steel.
Bottom is constructed of 16 gauge galvanized steel. Vertical base support braces are 14 gauge galvanized steel.
The LiquiTec® cold pan
has 2-6 die stamped 19.87"x11.87" (50.5cm x 30.2cm) opening with depressed edges. Formed well below each opening is 6.25" (15.9cm) deep with 0.5"drain manifold to gate valve. Each well, flush with the top, for flush mount pans to accommodate 12"x20" (30.2cm x 50.8cm) pans 4" (7.6cm) or 6" (15.2cm) deep, supplied by others. Product temperatures of 33ËÂÂF (1ËÂÂC) to 41ËÂÂF (5ËÂÂC) are maintained at 86ËÂÂF (30ËÂÂC) ambient room temperature, meeting NSF7 requirements. The cold pan is separated from the exterior top by a thermal break. Copper refrigeration tubing is attached to the sides of every well. Eutectic fluid is used as the heat transfer medium. Cold pan is full y insulated with foamed in place polyurethane insulation. Cold pans are equipped with a 0.5" stainless steel drain plumbed to the drain valve located behind the hinged louvered door.
uses HFC-134A refrigerant and has a self-contained 115 volt, 60 hertz, single phase hermetically sealed condensing unit with adjustable cold pan pressure control.
Bases are mounted on 6.12"(15.5cm) adjustable legs.
Delfield reserves the right to make changes to the design or specifications without prior notice.
NOTE: Certifications may differ with various options available for this product. Please check Technical Specifications tab for additional information.
Custom lengths available per inch
Granite, Hanstone® and Solid Surface top materials
Laminated base panels
Finished stainless steel or laminated end panels
Signage with overstructures, lights and heatlamps
Refrigerated base inserts
Heated base inserts
Dry storage base inserts
Mechanical access doors
Casters (stand alone units only)
Kickplates (units with legs only)
Adapter plates and bars
Remote refrigeration (specify refrigerant)
220V/50 cycle. Inclusion of this option will alter electrical specifications of the unit