18600BSTM
Self contained refrigerated work top table with backsplash
- Work tables have a stainless steel exterior standard.
- The compressor is located on the right side of the unit.
- Full finished stainless steel ends and top.
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DS18BSTM
18600BUCM
Self contained refrigerated work top table
- Work tables have a stainless steel exterior standard.
- The compressor is located on the right side of the unit.
- Full finished stainless steel ends and top.
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DS18BUCM
18600PDL
Self-Contained Refrigerated Dual Rail Prep Table with Flush Mount LiquiTec® Raised Rails
- Upper and lower rails are mechanically cooled utilizing LiquiTec® technology with die stamped 12"x20" openings
- Top is constructed of 18-gauge stainless steel
- 22-gauge stainless steel ends are standard
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DS18PDL
18600PTBM
Self-Contained Refrigerated Pizza Prep Tables
- Construction : Top, sides and ends are constructed of 18-gauge stainless steel
- Mechanically Cooled : Units are mechanically cooled with diestamped openings to accommodate 12" x 20" hotel pans or fractional pans
- Adapter : Pans and adapter bars by others
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DS18PTBM
18600PTL
Self-Contained Refrigerated Pizza Prep Table with Flush Mount LiquiTec Raised Rail
- Construction : Topis constructed of 18-gauge stainless steel, ends are 22-gauge stainless steel.
- Mechanically Cooled : Rail is mechanically cooled utilizing LiquiTec technology with die stamped 12"x20" openings
- Adapter : Pans and adapter bars by others
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DS18600PTL
18600VD
Versa Drawer
- VersaDrawer features a unique 4 temperature operation. Each drawer is completely independent and can operate as a refrigerator, freezer, chiller or thaw cabinet at any time.
- VersaDrawer features an easy to use microprocessor control with push button function selection.
- Alarm notifications and service diagnostics.
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DS18600VD
204, 204P, 248
WATER AND ICE STATION
- Stainless steel top with raised die stamped opening
- One-piece stainless steel lift off cover with handle
- 1" diameter drain plumbed out the bottom
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DS204_204P
240 Ice Chest
ICE CHEST
Width : 205/8"
Depth : 171/2"
Height : 17"
Weight : -
Specification Sheet
DS240
242, 250
UNDERCOUNTER SINK
Width : 131/2"
Depth : 14"
Height : 123/4"
Weight : -
Specification Sheet
DS242
305, 203
Ice Chest / Ice Chest Drop In
Width : 101/4"
Depth : 211/4"
Height : 13"
Weight : -
Specification Sheet
DS305
307, 241
GLASS FILLER SELF-CONTAINED
Width : 12"
Depth : 12"
Height : 91/2"
Weight : -
Specification Sheet
DS241
400 Series
Self-contained compact work top refrigerators & freezers
- Features Delfield's exclusive ABS interior. ABS is extremely durable - it won't dent, chip or corrode and is backed by a limited lifetime warranty.
- Stainless steel front, sides and top
- Two epoxy coated wire shelves, standard installed per unit.
Width : 271/4"
Depth : 281/2"
Height : 391/2"
Weight : -
Specification Sheet
DS402_403
406, 406-CA, 407, 407-CA
Undercounter Series
- Features Delfield's exclusive Delrite ABS interior. ABS is extremely durable - it won't dent, chip or corrode and is backed by a limited lifetime warranty.
- Stainless steel front, sides and top.
- Two epoxy coated wire shelves , standard installed per unit.
Width : 273/16"
Depth : 283/8"
Height : 357/16"
Weight : -
Specification Sheet
DS406_407
4427N, D4427N
Self-contained Front-Breathing Flat Top Refrigerated Base
- 100% front breathing : All 4400 and 4500 Series units are 100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up
- Tops : Durable, rugged stainless steel sides, top and front
- ABS interior : Features Delfield’s exclusive ABS interior (on sides). ABS is extremely durable - it won’t dent, chip or corrode and is backed by a limited lifetime warranty
Width : 271/8"
Depth : 311/2"
Height : 36"
Weight : -
Specification Sheet
DS4427N
4427N-6, D4427N-6, 4427N-8
Front-Breathing Self-Contained Compact Salad Top Refrigerators
- Air screen : Patented air screen ensures product stays cold without drying it out.
- Front Breathing : All 4400 series units are 100% front breathing, whigh allows the unit to be pushed against a wall or built into a cabinet or an existing line up.
- Stainless steel top, sides and front : Durable, rugged stainless steel sides, top and front
Width : 271/8"
Depth : 311/2"
Height : 36"
Weight : 245 lb
Specification Sheet
DS4427N-S
4427N-9M, D4427N-9M, 4427N-12M, D4427N-12M
Front-Breathing Self-Contained Compact Mega Top Refrigerators
- Air screen : Patented air screen ensures product stays cold without drying it out.
- Front Breathing : All 4400 series units are 100% front breathing, whigh allows the unit to be pushed against a wall or built into a cabinet or an existing line up.
- Stainless steel top, sides and front : Durable, rugged stainless steel sides, top and front
Width : 271/8"
Depth : 311/2"
Height : 36"
Weight : 245 lb
Specification Sheet
DS4427N-M
4432N, D4432N
Self-contained Front-Breathing Flat Top Refrigerated Base
- Front Breathing : All 4400 Series units are 100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up
- Construction : Durable, rugged stainless steel sides, top and front
- ABS Interior : Features Delfield's exclusive ABS interior (on sides). ABS is extremely durable - it won't dent, chip or corrode and is backed by a limited lifetime warranty
Width : 321/8"
Depth : 311/2"
Height : 36"
Weight : -
Specification Sheet
DS4432N
4432N-12M, D4432N-12M
Front-Breathing Self-Contained Compact Mega Top Refrigerators
- Air screen : Patented air screen ensures product stays cold without drying it out
- Front Breathing : 100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up
- Stainless steel top, sides and front : Durable, rugged stainless steel sides, top and front
Width : 321/8"
Depth : 311/2"
Height : 36"
Weight : -
Specification Sheet
DS4432N-M
4448N, D4448N
Self-contained Front-Breathing Flat Top Refrigerated Base
- Front Breathing : All 4400 Series units are 100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up
- Construction : Durable, rugged stainless steel sides, top and front
- ABS Interior : Features Delfield's exclusive ABS interior (on sides). ABS is extremely durable - it won't dent, chip or corrode and is backed by a limited lifetime warranty
Width : 481/8"
Depth : 311/2"
Height : 36"
Weight : -
Specification Sheet
DS4448N
4448N-18M, D4448N-18M
Front-Breathing Self-Contained Compact Mega Top Refrigerators
- Air screen : Patented air screen ensures product stays cold without drying it out.
- Front Breathing : All 4400 series units are 100% front breathing, whigh allows the unit to be pushed against a wall or built into a cabinet or an existing line up.
- Stainless steel top, sides and front : Durable, rugged stainless steel sides, top and front
Width : 481/8"
Depth : 311/2"
Height : 36"
Weight : -
Specification Sheet
DS4448N-M
4448N-8, D4448N-8, 4448N-12, D4448N-12
Front-Breathing Self-Contained Compact Salad Top Refrigerators
- Air screen : Patented air screen ensures product stays cold without drying it out.
- Front Breathing : All 4400 series units are 100% front breathing, whigh allows the unit to be pushed against a wall or built into a cabinet or an existing line up.
- Stainless steel top, sides and front : Durable, rugged stainless steel sides, top and front
Width : 481/8"
Depth : 311/2"
Height : 36"
Weight : -
Specification Sheet
DS4448N-S
4460N, D4460N
Self-contained Front-Breathing Flat Top Refrigerated Base
- Front Breathing : All 4400 Series units are 100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up
- Construction : Durable, rugged stainless steel sides, top and front
- ABS Interior : Features Delfield's exclusive ABS interior (on sides). ABS is extremely durable - it won't dent, chip or corrode and is backed by a limited lifetime warranty
Width : 601/8"
Depth : 311/2"
Height : 36"
Weight : -
Specification Sheet
DS4460N
4460N-12M, D4460N-12M, 4460N-18M, D4460N-18M, 4460N-24M, D4460N-24M
Front-Breathing Self-Contained Compact Mega Top Refrigerators
- Air screen : Patented air screen ensures product stays cold without drying it out.
- Front Breathing : All 4400 series units are 100% front breathing, whigh allows the unit to be pushed against a wall or built into a cabinet or an existing line up.
- Stainless steel top, sides and front : Durable, rugged stainless steel sides, top and front
Width : 601/8"
Depth : 311/2"
Height : 36"
Weight : -
Specification Sheet
DS4460N-M
4460N-8, D4460N-8, 4460N-12, D4460N-12
Front-Breathing Self-Contained Compact Salad Top Refrigerators
- Air screen : Patented air screen ensures product stays cold without drying it out.
- Front Breathing : All 4400 series units are 100% front breathing, whigh allows the unit to be pushed against a wall or built into a cabinet or an existing line up.
- Stainless steel top, sides and front : Durable, rugged stainless steel sides, top and front
Width : 601/8"
Depth : 311/2"
Height : 36"
Weight : -
Specification Sheet
DS4460N-S
4464N, D4464N
Self-contained Front-Breathing Flat Top Refrigerated Base
- Front Breathing : All 4400 Series units are 100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up
- Construction : Durable, rugged stainless steel sides, top and front
- ABS Interior : Features Delfield's exclusive ABS interior (on sides). ABS is extremely durable - it won't dent, chip or corrode and is backed by a limited lifetime warranty
Width : 641/8"
Depth : 311/2"
Height : 36"
Weight : -
Specification Sheet
DS4464N
4464N-12M, D4464N-12M, 4464N-18M, D4464N-18M, 4464N-24M, D4464N-24M, ST4464N-12M, STD4464N-12M, ST4464N-18M, STD4464N-18M
Front-Breathing Self-Contained Compact Mega Top Refrigerators
- Air screen : Patented air screen ensures product stays cold without drying it out.
- Front Breathing : All 4400 series units are 100% front breathing, whigh allows the unit to be pushed against a wall or built into a cabinet or an existing line up.
- Stainless steel top, sides and front : Durable, rugged stainless steel sides, top and front
Width : 641/8"
Depth : 311/2"
Height : 36"
Weight : 435 lb
Specification Sheet
DS4464N-M
4464N-12M, D4464N-12M, 4464N-18M, D4464N-18M, 4464N-24M, D4464N-24M, ST4464N-12M, STD4464N-12M, ST4464N-18M, STD4464N-18M
Front-Breathing Self-Contained Compact Mega Top Refrigerators
- Air screen : Patented air screen ensures product stays cold without drying it out.
- Front Breathing : All 4400 series units are 100% front breathing, whigh allows the unit to be pushed against a wall or built into a cabinet or an existing line up.
- Stainless steel top, sides and front : Durable, rugged stainless steel sides, top and front
Width : 641/8"
Depth : 311/2"
Height : 36"
Weight : 435 lb
Specification Sheet
DS4464N-M
4464N-8, D4464N-8, 4464N-12, D4464N-12, 4464N-16, D4464N-16, ST4464N-8, STD4464N-8, ST4464N-12, STD4464N-12
Front-Breathing Self-Contained Compact Salad Top Refrigerators
- Air screen : Patented air screen ensures product stays cold without drying it out.
- Front Breathing : All 4400 series units are 100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up.
- Stainless steel top, sides and front : Durable, rugged stainless steel sides, top and front
Width : 641/8"
Depth : 311/2"
Height : 36"
Weight : 446 lb
Specification Sheet
DS4464N-S
4472N, D4472N
Self-contained Front-Breathing Flat Top Refrigerated Base
- Front Breathing : All 4400 Series units are 100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up
- Construction : Durable, rugged stainless steel sides, top and front
- ABS Interior : Features Delfield's exclusive ABS interior (on sides). ABS is extremely durable - it won't dent, chip or corrode and is backed by a limited lifetime warranty
Width : 721/8"
Depth : 311/2"
Height : 36"
Weight : -
Specification Sheet
DS4472N
4472N-12, D4472N-12, 4472NN-18, D4472N-18
Front-Breathing Self-Contained Compact Salad Top Refrigerators
- Air screen : Patented air screen ensures product stays cold without drying it out.
- Front Breathing : All 4400 series units are 100% front breathing, whigh allows the unit to be pushed against a wall or built into a cabinet or an existing line up.
- Stainless steel top, sides and front : Durable, rugged stainless steel sides, top and front
Width : 721/8"
Depth : 311/2"
Height : 36"
Weight : -
Specification Sheet
DS4472N-S
4472N-18M, D4472N-18M, 4472N-24M, D4472N-24M, 4472N-30M, D4472N-30M
Front-Breathing Self-Contained Compact Mega Top Refrigerators
- Air screen : Patented air screen ensures product stays cold without drying it out.
- Front Breathing : All 4400 series units are 100% front breathing, whigh allows the unit to be pushed against a wall or built into a cabinet or an existing line up.
- Stainless steel top, sides and front : Durable, rugged stainless steel sides, top and front
Width : 721/8"
Depth : 311/2"
Height : 36"
Weight : -
Specification Sheet
DS4472N-M
4532N, ST4532N, D4532N, STD4532N, 4560N, ST4560N
Self-contained Front-Breathing Flat Top Freezer Base
- Front Breathing : All 4400 Series units are 100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up
- Construction : Durable, rugged stainless steel sides, top and front
- ABS Interior : Features Delfield's exclusive ABS interior (on sides). ABS is extremely durable - it won't dent, chip or corrode and is backed by a limited lifetime warranty
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DS4532N
6000XL Series Glass Door Refrigerator
Glass Door Reach-In Refrigerators
- Doors : Standard glass doors
- Exterior sides : Sides are made of durable aluminum
- Delrite® : Seamless, Delrite® ABS interior liner
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DS6000XL-G
6000XL Series Solid Door Refrigerator
Solid Door Reach-In Refrigerators
- Doors : Stainless steel doors and front shroud
- Exterior sides : Sides are made of durable aluminum
- Delrite® : Seamless, Delrite® ABS interior liner
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DS6000XL-S
6100XL Series Solid Door Freezers
Solid Door Reach-In Freezers
- Doors : Stainless steel doors and front shroud
- Exterior sides : Sides are made of durable aluminum
- Delrite® : Seamless, Delrite® ABS interior liner
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DS6100XL-S
8100EF
LiquiTec - Drop-In Self-Contained Eutectic Fluid Refrigerated Cold Pans
- Stainless steel top construction
- LiquiTec® cold pans with eutectic fluid technology
- Flush mounted 12” x 20” individual stainless steel wells
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DS8100EF
8100EFN
LiquiTec(TM) Slim Line Drop-In Self-Contained Eutectic Fluid Refrigerated Cold Pans
- Top : One-piece 18-gauge stainless steel, with .62" (1.57cm) overhang around perimeter and die stamped 19.87" x 11.87" (50.5cm x 30.2cm) openings with depressed edges. Formed well below each opening is 6.25" (15.9cm) deep with .5"drain manifold to gate valve. Each well, flush with the top, for flush mount pans to accommodate 12" x 20" (30.5cm x 50.8cm) pans 4" (7.6cm) or 6" (15.2cm) deep supplied by others. Product temperatures of 33°F (1°C) to 41°F (5°C) are maintained at 86°F (30°C) ambient room temperature, meeting NSF 7 requirements. Sides and bottom: are insulated with high-density closed-cell polyurethane. Exterior housing is 22-gauge galvanized steel.
- Sides : Sides and bottom: are insulated with high-density closed-cell polyurethane. Exterior housing is 22-gauge galvanized steel.
- Refrigeration : Refrigeration: system uses HFC-404A refrigerant. Eutectic fluid is used as the heat transfer medium. Condensing unit is suspended below the cold pan on a 16-gauge steel frame. Temperature control has an OFF position to shut down the cold pan. Unit is supplied with expansion valve. A stainless steel louver is provided for field installation; cutout dimension is 11" x 22" (27.94cm x 55.88cm). A second opening 11" x 22" (27.94cm x 55.88cm) at the rear of thecabinet should be provided at installation to allow for proper air circulation.
Width : 475/8"
Depth : 183/16"
Height : 197/8"
Weight : 235 lb
Specification Sheet
DS8100EFN
ACR-26S Shelleymatic
Air Curtain Refrigerator
- Interior Cabinet : 22-gauge stainless steel construction, sealed joints and seams provide the ACR-26S with a strong and durable interior. Corners are rounded for ease of cleaning and conforms to NSF standards. Interior air ducts on the left, right and top provide proper air flow to the cabinet. The interior is designed for use with 18" x 26" (46cm x 58cm) trays on adjustable slides spaced 3.75" (9.5cm) apart. Interior panels and brackets are removable for easy cleaning.
- Air Curtain : When the door is open, Delfield's patented air curtain design directs cold air across the cabinet opening, keeping hot air out and cold air in for extended periods of time. The unit will maintain a maximum of 45°F box temperature at 70°F ambient with the door open and all trays fully behind the air curtain, during peak production times, quickly returning to a normal 36°F. With the door closed, a maximum 40°F at 100°F ambient is maintained (normal operation) while running only 15% in an 85° room.
- Refrigeration : The base of the cabinet houses the condensing unit. Louvered front and rear panels provide ventilation, as well as easy access for cleaning and servicing the condensing unit and electrical wiring. The refrigeration system uses HFC-404A refrigerant. Compressor is 1/2 horsepower (120v-60c-1ph).
Width : 261/2"
Depth : 361/4"
Height : 795/8"
Weight : 592 lb
Specification Sheet
DSACR
ASM
Drop-In Air Screen Merchandiser
- VARIETY OF SIZES : A wide offering of sizes for drop-ins: 36", 48" and 60" lengths with a 42" height.
- Maintains temperature : Meets NSF7 type 2 requirements wich maintain 33Ëš-41Ëš temperature in 80Ëš ambient environment with 55% relative humidity.
- Showcase : Designed to showcase all prepackaged products. Extra pan in the base of the display area is perfect for salads, sandwiches, wraps, fruit plates - virtually anything.
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSASM
CAB2 Shelleymatic
Mobile enclosed two-stack dish dispensers
- CAB2-ET EVEN TEMP HEATED DISPENSERS ONLY: : Unit shall be supplied with 9' (2.7m) cord and NEMA 5-15P plug. Electrical connections shall be 120 volt, 60 hertz, single phase. Each tube shall have its own convection heating module consisting of a single 400 watt heating element and fan motor, located in the center of the interior bottom cavity. Air intake shall have a filter. Each tube shall have an adjustable thermostat inside the motor housing and an ON/OFF switch on one of the dish guide posts. Unit shall maintain temperature between 120°F - 140°F (49°C - 60°C).
- CAB2-QT QUICK TEMP HEATED DISPENSERS ONLY: : Unit shall be supplied with 9' (2.7m) cord and NEMA 5-20P plug. Electrical connections shall be 120 volt, 60 hertz, single phase. Each tube shall have its own convection heating module consisting of a single 700 watt heating element and fan motor, located in the center of the interior bottom cavity. Air intake shall have a filter. Each tube shall have an adjustable thermostat inside the motor housing and an ON/OFF switch on one of the dish guide posts. Unit shall maintain temperature between 150°F - 170°F (66°C - 77°C).
- Cover : Each tube shall have a stainless steel cover.
Width : 281/2"
Depth : 17"
Height : 36"
Weight : 125 lb
Specification Sheet
DSCAB2
CAB3 Shelleymatic
Mobile enclosed three-stack dish dispensers
- CAB3-ET EVEN TEMP HEATED DISPENSERS ONLY: : Unit shall be supplied with 9' (2.7m) cord and NEMA 5-15P plug. Electrical connections shall be 120 volt, 60 hertz, single phase. Each tube shall have its own convection heating module consisting of a single 400 watt heating element and fan motor, located in the center of the interior bottom cavity. Air intake shall have a filter. Each tube shall have an adjustable thermostat inside the motor housing and an ON/OFF switch on one of the dish guide posts. Unit shall maintain temperature between 120°F - 140°F (49°C - 60°C).
- CAB3-QT QUICK TEMP HEATED DISPENSERS ONLY: : Unit shall be supplied with 9' (2.7m) cord and NEMA 5-20P plug. Electrical connections shall be 120 volt, 60 hertz, single phase. Each tube shall have its own convection heating module consisting of a single 700 watt heating element and fan motor, located in the center of the interior bottom cavity. Air intake shall have a filter. Each tube shall have an adjustable thermostat inside the motor housing and an ON/OFF switch on one of the dish guide posts. Unit shall maintain temperature between 150°F - 170°F (66°C - 77°C).
- Cover : Each tube shall have a stainless steel cover.
Width : 411/4"
Depth : 17"
Height : 36"
Weight : 173 lb
Specification Sheet
DSCAB3
CAB4 Shelleymatic
Mobile enclosed four-stack dish dispensers
- CAB4-ET EVEN TEMP HEATED DISPENSERS ONLY: : Unit shall be supplied with 9' (2.7m) cord and NEMA 6-20P plug. Electrical connections shall be 208-230 volt, 60 hertz, single phase. Each tube shall have its own convection heating module consisting of a single 400 watt heating element and fan motor, located in the center of the interior bottom cavity. Air intake shall have a filter. Each tube shall have an adjustable thermostat inside the motor housing and an ON/OFF switch on one of the dish guide posts. Unit shall maintain temperature between 120°F - 140°F (49°C - 60°C).
- CAB4-QT QUICK TEMP HEATED DISPENSERS ONLY: : Unit shall be supplied with 9' (2.7m) cord and NEMA 6-20P plug. Electrical connections shall be 208-230 volt, 60 hertz, single phase. Each tube shall have its own convection heating module consisting of a single 700 watt heating element and fan motor, located in the center of the interior bottom cavity. Air intake shall have a filter. Each tube shall have an adjustable thermostat inside the motor housing and an ON/OFF switch on one of the dish guide posts. Unit shall maintain temperature between 150°F - 170°F (66°C - 77°C).
- Cover : Each tube shall have a stainless dome cover.
Width : 27"
Depth : 27"
Height : 36"
Weight : 181 lb
Specification Sheet
DSCAB4
Component Crafted Custom Fabrication
Integrated Design Solutions Creating Foodservice Productivity
Width : -
Depth : -
Height : -
Weight : -
CT Shelleymatic
Mobile Cantilevered Tray and Rack Dispensers
Width : 13"
Depth : 22"
Height : 37"
Weight : 106 lb
Specification Sheet
MSCT
CTP-NB Standard
Counter top condiment rail
- Unit Interior : has a 22-gauge stainless steel liner with foamed-in-place polyurethane insulation.
- Base : of unit has removable louvers at front and rear for proper air flow and access to the condensing unit. Protective rubber bumpers are affixed to the back of the unit.
- Refrigeration System : uses HFC-134a refrigerant. Refrigerated rail is designed to maintain41°F (5°C) at 85°F ambient, 50% relative humidity for up to (4) hours when pans are recessed 3" (7.6 cm) below top. Food and product should be placed in unit at 37°F (3°C). On/off switch is located at front of unit.
Width : 277/8"
Depth : 17"
Height : 17"
Weight : 121 lb
Specification Sheet
DSCTPNB
DA730 Utility Wall
Stainless steel utility wall
- Stailess steel utility wall
- 144" max length of one piece, splines required for longer lengths
- 14ga rolled v-tray slide top
Width : -
Depth : 14"
Height : 34"
Weight : -
Specification Sheet
DA730
DCBC Concepts
Beverage Bar
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removable panels
- Heavy duty base support structure
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSDCBC
DCBU Concepts
Utility Counter
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removable panels
- Heavy duty base support structure
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSDCBU
DCBU-R Concepts
Curved Utility Counter
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removable panels
- Heavy duty base support structure
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSDCBUR
DCBU-T
Utility Serving Counter Tiered
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removeable panels
- 36" work height
Width : -
Depth : -
Height : -
Weight : -
DCCS-DD
Cashier counter
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removeable panels
- 36" work height
Width : 72"
Depth : 36"
Height : 36"
Weight : 540 lb
Specification Sheet
DSDCCS
DCCS-DDW
Cashier counter
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removeable panels
- 36" work height
Width : 72"
Depth : 54"
Height : 36"
Weight : 590 lb
Specification Sheet
DSDCCS
DCCS-DDWL
Cashier counter
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removeable panels
- 36" work height
Width : 72"
Depth : 54"
Height : 36"
Weight : 564 lb
Specification Sheet
DSDCCS
DCCS-DDWR
Cashier counter
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removeable panels
- 36" work height
Width : 72"
Depth : 54"
Height : 36"
Weight : 565 lb
Specification Sheet
DSDCCS
DCCS-SD
Cashier counter
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removeable panels
- 36" work height
Width : 45"
Depth : 36"
Height : 36"
Weight : 270 lb
Specification Sheet
DSDCCS
DCCS-SD Concepts
Radial Cashier Station
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removable panels
- Heavy duty base support structure
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSDCCSD
DCCS-SDW
Cashier counter
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removeable panels
- 36" work height
Width : 45"
Depth : 54"
Height : 36"
Weight : 320 lb
Specification Sheet
DSDCCS
DCCS-SDWL
Cashier counter
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removeable panels
- 36" work height
Width : 45"
Depth : 54"
Height : 36"
Weight : 295 lb
Specification Sheet
DSDCCS
DCCS-SDWR
Cashier counter
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removeable panels
- 36" work height
Width : 45"
Depth : 54"
Height : 36"
Weight : 295 lb
Specification Sheet
DSDCCS
DCDM Concepts
Display Merchandiser
- Laminated ends, front and back
- Two removable laminated shelves
- Laminated shelves are adjustable and able to be slanted or flat
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSDCDM
DCFS
FlexiShield Food Shields
- Mostly glass display allows you to see product from every angle.
- Single or double tier
- 1" stainless steel legs
Width : -
Depth : 0"
Height : -
Weight : -
DCFSFS
Flexible Shield, Converts to Three Positions, Single Tier
- Pivots in three positions: full service and two self service positions
- Mostly glass display allows you to see product from every angle
- 1" stainless steel legs
Width : -
Depth : 181/8"
Height : 161/8"
Weight : -
Specification Sheet
DSDCFSFS
DCFSFS2
Flexible Shield, Converts to Three Positions, Two Tier
- Pivots in three positions: full service and two self service positions
- Mostly glass display allows you to see product from every angle
- 1" stainless steel legs
Width : -
Depth : 181/8"
Height : 25"
Weight : -
Specification Sheet
DSDCFSFS2
DCFSG
Glass Front, Single Tier with Glass Shelf, Single Service
- Mostly glass display allows you to see product from every angle
- 1" stainless steel legs
- Meets 2011 NSF requirements
Width : -
Depth : 181/8"
Height : 161/8"
Weight : -
Specification Sheet
DSDCFSG
DCFSG2
Glass Front, Double Tier with Two Glass Shelves, Single Service
- Mostly glass display allows you to see product form every angle
- 1" stainless steel legs
- meets 2011 NSF requirements
Width : -
Depth : 1415/16"
Height : 25"
Weight : -
Specification Sheet
DSDCFSG2
DCFSGH
Double Tier, Bottom Tier Full Glass Front, Second Tier Sneeze Guard
- Mostly glass display allows you to see product from every angle
- 1" stainless steel legs
- Meets 2011 NSF requirements
Width : -
Depth : 181/8"
Height : 25"
Weight : -
Specification Sheet
DSDCFSGH
DCFSH
Two Tier Display, Sneeze Guard, Single Service
- Mostly glass display allows you to see product from every angle
- 1" stainless steel legs
- Meets 2011 NSF requirements
Width : -
Depth : 181/8"
Height : 25"
Weight : -
Specification Sheet
DSDCFSH
DCFSHD
Two Tier Display With Sneeze Guard, Dual Service
- Mostly glass display allows you to see product form every angle
- 1" stainless steel legs
- Meets 2011 NSF requirements
Width : -
Depth : 337/16"
Height : 25"
Weight : 0 lb
Specification Sheet
DSDCFSHD
DCFSHG
Double Tier, Bottom Tier Sneeze Guard, Second Tier Full Glass Front
- Mostly glass display allows you to see product from every angle
- 1" stainless steel legs
- Meets 2011 NSF requirements
Width : -
Depth : 181/8"
Height : 25"
Weight : -
Specification Sheet
DSDCFSHG
DCFSKD
Single Tier, Fixed Sneeze Guard Front, Dual Service
- Mostly glass display allows you to see product from every angle
- 1" stainless steel legs
- Meets 2011 NSF requirements
Width : -
Depth : 337/16"
Height : 161/8"
Weight : -
Specification Sheet
DSDCFSKD
DCFSKS
Single Tier, Fixed Sneeze Guard Front, Single Service
- Mostly glass display allows you to see product from every angle
- 1" stainless steel legs
- Meets 2011 NSF requirements
Width : -
Depth : 181/8"
Height : 161/8"
Weight : -
Specification Sheet
DSDCFSKS
DCFSRIG Radial Flexishield
Radial glass front, single tier with glass shelf, single service, inside radial
- Mostly glass display allows you to see product from every angle
- 1" stainless steel legs
- Meets NSF requirements
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSDCFSRG
DCFSRIKS
Radial single tier, fixed sneeze guard front, single service
- Mostly glass display allows you to see product from every angle
- 1" stainless steel legs
- Meets NSF requirements
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSDCFSRKS
DCFSRKD
Radial single tier, fixed sneeze guard front, dual service
- Mostly glass display allows you to see product from every angle
- 1" stainless steel legs
- Meets NSF requirements
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSDCFSRKD
DCFSROG
Radial glass front, single tier with glass shelf, single service
- Mostly glass display allows you to see product from every angle
- 1" stainless steel legs
- Meets NSF requirements
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSDCFSRG
DCFSROKS
Radial single tier, fixed sneeze guard front, single service
- Mostly glass display allows you to see product from every angle
- 1" stainless steel legs
- Meets NSF requirements
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSDCFSRKS
DCFSROKS-2
Radial single tier, fixed sneeze guard front, single service, 2 pan outside
- Mostly glass display allows you to see product from every angle
- 1" stainless steel legs
- Meets 2011 NSF requirements
Width : 42"
Depth : 18"
Height : 149/16"
Weight : -
Specification Sheet
DSDCFSRKS
DCFSSS
Glass Front, Slicer Shield Style
- Mostly glass display allows you to see product from every angle
- 1" stainless steel legs
- Meets 2011 NSF requirements
Width : -
Depth : 11"
Height : -
Weight : -
Specification Sheet
DSDCFSSS
DC-FT
Self-Contained Frost Top Serving Counter
- Heavy Duty Sainless steel top
- Reinforced stainless steel front and rear removable panels
- Heavy duty base support structure
Width : 38"
Depth : 36"
Height : 36"
Weight : 399 lb
Specification Sheet
DSDCFT
DC-FT2
Self-Contained Frost Top Serving Counter
- Heavy Duty Sainless steel top
- Reinforced stainless steel front and rear removable panels
- Heavy duty base support structure
Width : 38"
Depth : 36"
Height : 36"
Weight : 399 lb
Specification Sheet
DSDCFT
DC-FT3
Self-Contained Frost Top Serving Counter
- Heavy Duty Sainless steel top
- Reinforced stainless steel front and rear removable panels
- Heavy duty base support structure
Width : 52"
Depth : 36"
Height : 36"
Weight : 546 lb
Specification Sheet
DSDCFT
DC-FT4
Self-Contained Frost Top Serving Counter
- Heavy Duty Sainless steel top
- Reinforced stainless steel front and rear removable panels
- Heavy duty base support structure
Width : 66"
Depth : 36"
Height : 36"
Weight : 693 lb
Specification Sheet
DSDCFT
DC-FT5
Self-Contained Frost Top Serving Counter
- Heavy Duty Sainless steel top
- Reinforced stainless steel front and rear removable panels
- Heavy duty base support structure
Width : 80"
Depth : 36"
Height : 36"
Weight : 840 lb
Specification Sheet
DSDCFT
DC-FT6
Self-Contained Frost Top Serving Counter
- Heavy Duty Sainless steel top
- Reinforced stainless steel front and rear removable panels
- Heavy duty base support structure
Width : 94"
Depth : 36"
Height : 36"
Weight : 987 lb
Specification Sheet
DSDCFT
DC-H2
Heated Serving Counter
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removeable panels
- Flush mount die stamped stainless steel heated food well
Width : 38"
Depth : 36"
Height : 36"
Weight : 228 lb
Specification Sheet
DSDCH
DC-H3
Heated Serving Counter
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removeable panels
- Flush mount die stamped stainless steel heated food well
Width : 52"
Depth : 36"
Height : 36"
Weight : 312 lb
Specification Sheet
DSDCH
DC-H4
Heated Serving Counter
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removeable panels
- Flush mount die stamped stainless steel heated food well
Width : 66"
Depth : 36"
Height : 36"
Weight : 396 lb
Specification Sheet
DSDCH
DC-H5
Heated Serving Counter
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removeable panels
- Flush mount die stamped stainless steel heated food well
Width : 80"
Depth : 36"
Height : 36"
Weight : 480 lb
Specification Sheet
DSDCH
DC-H6
Heated Serving Counter
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removeable panels
- Flush mount die stamped stainless steel heated food well
Width : 94"
Depth : 36"
Height : 36"
Weight : 564 lb
Specification Sheet
DSDCH
DCHS Concepts
Handsink Modules
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removable panels
- Heavy duty base support structure
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSDCHS
DC-IC2
Self-Contained Ice Cooled Serving Counter
- NSF-7 certified performance
- Heavy Duty Sainless steel top
- Reinforced stainless steel front and rear removable panels
Width : 38"
Depth : 36"
Height : 36"
Weight : 209 lb
Specification Sheet
DSDCIC
DC-IC3
Self-Contained Ice Cooled Serving Counter
- NSF-7 certified performance
- Heavy Duty Sainless steel top
- Reinforced stainless steel front and rear removable panels
Width : 52"
Depth : 36"
Height : 36"
Weight : 286 lb
Specification Sheet
DSDCIC
DC-IC4
Self-Contained Ice Cooled Serving Counter
- NSF-7 certified performance
- Heavy Duty Sainless steel top
- Reinforced stainless steel front and rear removable panels
Width : 66"
Depth : 36"
Height : 36"
Weight : 363 lb
Specification Sheet
DSDCIC
DC-IC5
Self-Contained Ice Cooled Serving Counter
- NSF-7 certified performance
- Heavy Duty Sainless steel top
- Reinforced stainless steel front and rear removable panels
Width : 80"
Depth : 36"
Height : 36"
Weight : 440 lb
Specification Sheet
DSDCIC
DC-IC6
Self-Contained Ice Cooled Serving Counter
- NSF-7 certified performance
- Heavy Duty Sainless steel top
- Reinforced stainless steel front and rear removable panels
Width : 94"
Depth : 36"
Height : 36"
Weight : 517 lb
Specification Sheet
DSDCIC
DC-L2
Self-Contained LiquiTec® Cold Pan Serving Counter
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removeable panels
- Flush mounted pans
Width : 38"
Depth : 36"
Height : 36"
Weight : 399 lb
Specification Sheet
DSDCL
DC-L3
Self-Contained LiquiTec® Cold Pan Serving Counter
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removeable panels
- Flush mounted pans
Width : 52"
Depth : 36"
Height : 36"
Weight : 468 lb
Specification Sheet
DSDCL
DC-L4
Self-Contained LiquiTec® Cold Pan Serving Counter
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removeable panels
- Flush mounted pans
Width : 66"
Depth : 36"
Height : 36"
Weight : 594 lb
Specification Sheet
DSDCL
DC-L5
Self-Contained LiquiTec® Cold Pan Serving Counter
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removeable panels
- Flush mounted pans
Width : 80"
Depth : 36"
Height : 36"
Weight : 720 lb
Specification Sheet
DSDCL
DC-L6
Self-Contained LiquiTec® Cold Pan Serving Counter
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removeable panels
- Flush mounted pans
Width : 94"
Depth : 36"
Height : 36"
Weight : 846 lb
Specification Sheet
DSDCL
DC-MC2
Self-Contained Mechanically Cooled Serving Counter
- NSF-7 certified performance
- Heavy Duty Sainless steel top
- Reinforced stainless steel front and rear removable panels
Width : 38"
Depth : 36"
Height : 36"
Weight : 323 lb
Specification Sheet
DSDCMC
DC-MC3
Self-Contained Mechanically Cooled Serving Counter
- NSF-7 certified performance
- Heavy Duty Sainless steel top
- Reinforced stainless steel front and rear removable panels
Width : 52"
Depth : 36"
Height : 36"
Weight : 442 lb
Specification Sheet
DSDCMC
DC-MC4
Self-Contained Mechanically Cooled Serving Counter
- NSF-7 certified performance
- Heavy Duty Sainless steel top
- Reinforced stainless steel front and rear removable panels
Width : 66"
Depth : 36"
Height : 36"
Weight : 561 lb
Specification Sheet
DSDCMC
DC-MC5
Self-Contained Mechanically Cooled Serving Counter
- NSF-7 certified performance
- Heavy Duty Sainless steel top
- Reinforced stainless steel front and rear removable panels
Width : 80"
Depth : 36"
Height : 36"
Weight : 680 lb
Specification Sheet
DSDCMC
DC-MC6
Self-Contained Mechanically Cooled Serving Counter
- NSF-7 certified performance
- Heavy Duty Sainless steel top
- Reinforced stainless steel front and rear removable panels
Width : 94"
Depth : 36"
Height : 36"
Weight : 799 lb
Specification Sheet
DSDCMC
DCRU Concepts
Radial Counter
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removable panels
- Heavy duty base support structure
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSDCRUT2
DCRU-H
Radial Heated Serving Counter
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removeable panels
- Flush mount die stamped stainless steel heated food well
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
dsdcruh
DCRU-H Concepts
Radial Heated Serving counter
- Flush mount die stamped stainless steel heated food well
- 1/2" stainless steel drains
- Heavy duty stainless steel top
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSDCRUH2
DCRU-H2
Radial Heated Serving Counter
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removeable panels
- Flush mount die stamped stainless steel heated food well
Width : 103"
Depth : 35"
Height : 35"
Weight : 563 lb
Specification Sheet
dsdcruh
DCRU-H3
Radial Heated Serving Counter
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removeable panels
- Flush mount die stamped stainless steel heated food well
Width : 103"
Depth : 35"
Height : 35"
Weight : 563 lb
Specification Sheet
dsdcruh
DCRU-H4
Radial Heated Serving Counter
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removeable panels
- Flush mount die stamped stainless steel heated food well
Width : 103"
Depth : 35"
Height : 35"
Weight : 563 lb
Specification Sheet
dsdcruh
DCRU-H5
Radial Heated Serving Counter
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removeable panels
- Flush mount die stamped stainless steel heated food well
Width : 103"
Depth : 35"
Height : 35"
Weight : 563 lb
Specification Sheet
dsdcruh
DCRU-I
Radial Utility Serving Counter
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removeable panels
- 36" work height
Width : 1033/8"
Depth : 36"
Height : 36"
Weight : 464 lb
Specification Sheet
DSDCRU
DCRU-IC Concepts
Radial ice cooled serving counters
- NSF-7 certified performance
- Stainless steel pan clip
- Heavy duty stainless steel top
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSDCRUIC2
DCRU-IT
Radial Utility Serving Tiered Counter
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removeable panels
- 36" work height
Width : 1033/8"
Depth : 36"
Height : 36"
Weight : 464 lb
Specification Sheet
DSDCRU
DCRU-L1
Radial Self-Contained LiquiTec® Cold Pan Serving Counter
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removeable panels
- Flush mounted pans
Width : 103"
Depth : 35"
Height : 35"
Weight : 633 lb
Specification Sheet
DSDCRUIC
DCRU-L2
Radial Self-Contained LiquiTec® Cold Pan Serving Counter
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removeable panels
- Flush mounted pans
Width : 103"
Depth : 35"
Height : 35"
Weight : 679 lb
Specification Sheet
DSDCRUIC
DCRU-L3
Radial Self-Contained LiquiTec® Cold Pan Serving Counter
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removeable panels
- Flush mounted pans
Width : 103"
Depth : 35"
Height : 35"
Weight : 848 lb
Specification Sheet
DSDCRUIC
DCRU-L4
Radial Self-Contained LiquiTec® Cold Pan Serving Counter
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removeable panels
- Flush mounted pans
Width : 103"
Depth : 35"
Height : 35"
Weight : 894 lb
Specification Sheet
DSDCRUIC
DCRU-MC Concepts
Radial Self-Contained Mechanically Cooled Serving Counter
- NSF-7 certified performance
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removable panels
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSDCRUMC2
DCRU-MC2
Radial Self-Contained Mechanically Cooled Serving Counter
- NSF-7 certified performance
- Heavy Duty Sainless steel top
- Reinforced stainless steel front and rear removable panels
Width : 103"
Depth : 35"
Height : 35"
Weight : 604 lb
Specification Sheet
DSDCRUMC
DCRU-MC3
Radial Self-Contained Mechanically Cooled Serving Counter
- NSF-7 certified performance
- Heavy Duty Sainless steel top
- Reinforced stainless steel front and rear removable panels
Width : 103"
Depth : 35"
Height : 35"
Weight : 644 lb
Specification Sheet
DSDCRUMC
DCRU-MC4
Radial Self-Contained Mechanically Cooled Serving Counter
- NSF-7 certified performance
- Heavy Duty Sainless steel top
- Reinforced stainless steel front and rear removable panels
Width : 103"
Depth : 35"
Height : 35"
Weight : 684 lb
Specification Sheet
DSDCRUMC
DCRU-MC5
Radial Self-Contained Mechanically Cooled Serving Counter
- NSF-7 certified performance
- Heavy Duty Sainless steel top
- Reinforced stainless steel front and rear removable panels
Width : 103"
Depth : 35"
Height : 35"
Weight : 724 lb
Specification Sheet
DSDCRUMC
DCRU-O
Radial Utility Serving Counter
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removeable panels
- 36" work height
Width : 1033/8"
Depth : 36"
Height : 36"
Weight : 464 lb
Specification Sheet
DSDCRU
DCRU-OT
Radial Utility Serving Tiered Counter
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removeable panels
- 36" work height
Width : 1033/8"
Depth : 36"
Height : 36"
Weight : 464 lb
Specification Sheet
DSDCRU
DCRU-T
Radial transition counter
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removeable panels
- 36" work height
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSDCRUT
DCT Concepts Tower Module
Concepts
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removable panels
- Heavy duty base support structure
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSDCT
DC-T Transition Pieces
Concepts Angled Transition counters
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removeable panels
- 36" work height
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSDCRUT
DC-TT Angled Tiered
Concepts angled tiered transitioncounter
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removeable panels
- 36" work height
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSDCRUT
DC-TT Radial Tiered
Concepts radial tiered transition counter
- Heavy duty stainless steel top
- Reinforced stainless steel front and rear removeable panels
- 36" work height
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSDCRUT
DIS Shelleymatic
Drop-in dish dispensers
- APPLIES TO DIS-ET EVEN TEMP HEATED DISPENSERS ONLY: : Dish dispenser shall have a 22-gauge stainless steel outer jacket. Unit shall be supplied with 4'0" (0.9m) cord and NEMA 5-15P plug. Electrical connections shall be 120 volt, 60 hertz, single phase. The tube shall have its own convection heating module consisting of a single 400 watt heating element and fan motor, located in the center of the interior bottom cavity. Air intake shall have a filter. The tube shall have an adjustable thermostat inside the motor housing and an ON/OFF switch on one of the dish guide posts. Unit requires a minimum of 1" (2.54cm) clearance at bottom for air circulation. Unit shall maintain temperature between 120°F - 140°F (49°C - 60°C).
- APPLIES TO DIS-QT QUICK TEMP HEATED DISPENSERS ONLY: : Dish dispenser shall have a 22-gauge stainless steel outer jacket. Unit shall be supplied with 3' (0.9m) cord and NEMA 5-15P plug. Electrical connections shall be 120 volt, 60 hertz, single phase. The tube shall have its own convection heating module consisting of a single 700 watt heating element and fan motor, located in the center of the interior bottom cavity. Air intake shall have a filter. The tube shall have an adjustable thermostat inside the motor housing and an ON/OFF switch on one of the dish guide posts. Unit requires a minimum of 1" (2.54cm) clearance at bottom for air circulation. Unit shall maintain temperature between 150°F - 170°F (66°C - 77°C).
- Cover : Unit shall have a stainless steel cover.
Width : 85/16"
Depth : 73/4"
Height : 28"
Weight : 390 lb
Specification Sheet
DSDIS
DMER3-G
Counter top glass door cooler
- Built in door handle
- Blue top header sign standard
- Forced air evaporator for quick temperature pull down
Width : 18"
Depth : 19"
Height : 341/4"
Weight : 119 lb
Specification Sheet
DSDMER3
DMER7-G
Counter top glass door cooler
- Built in door handle
- Blue top header sign standard
- Forced air evaporator for quick temperature pull down
Width : 21"
Depth : 22"
Height : 37"
Weight : 150 lb
Specification Sheet
DSDMER7
DMER-G
Hinged glass door cooler
- Built in door handle
- Blue top header sign standard
- Forced air evaporator for quick temperature pull down
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSDMERH
DMER-G Single
Single section hinged glass door cooler
- Built in door handle
- Blue top header sign standard
- Forced air evaporator for quick temperature pull down
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSDMERSH
DMER-SLG
Sliding glass door cooler
- Built in door handle
- Blue top header sign standard
- Forced air evaporator for quick temperature pull down
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSDMERSLG
EHEI
E-Chef Hot Food Tables
- Standard stainless steel top and sides
- Individual wells with infinite controls
- 8" polyethylene cutting board
Width : 0"
Depth : 311/2"
Height : 36"
Weight : 0 lb
Specification Sheet
DSEHEI
F13BC
31.5" (80cm) Deep Self-Contained Low Temp, Ice Cream Cabinets with Syrup Rail
- Interior : is constructed of 22-gauge stainless steel. Liner is insulated with 2.5" (6.4 cm) foamed-in-place polyurethane. Unit has a cold wall refrigeration system and is supplied with a low pressure control for the tank and an evaporator pressure regulating valve for the rail. Unit is designed to maintain 0°F (-18°C) to 5° F (-15°C) in the tank and 33°F (1°C) to 40°F (4°C) in the rail.
- Exterior Front : has 22-gauge stainless steel front panel(s). Exterior ends are constructed of 18-gauge galvanized steel. Unit has condensing unit on right end of cabinet and wired with cord and plug. Housing for condensing unit has a louvered front panel.
- Electrical Connections : are 115 volt, 60 Hertz, single phase.
Width : 44"
Depth : 311/2"
Height : 463/8"
Weight : 435 lb
Specification Sheet
DSF13BC
F13BR
31.5" (80cm) Deep Remote Low Temp, Ice Cream Cabinets With Syrup Rail
- Interior : is constructed of 22-gauge stainless steel. Liner is insulated with 2.5" (6.4 cm) foamed-in-place polyurethane. Unit has a cold wall refrigeration system and is supplied with a low pressure control for the tank and an evaporator pressure regulating valve for the rail. Unit is designed to maintain 0°F (-18°C) to 5°F (-15°C) in the tank and 33°F (1°C) to 40°F (4°C) in the rail.
- Exterior Front : is constructed of 22-gauge stainless steel. Liner is insulated with 2.5" (6.4 cm) foamed-in-place polyurethane. Unit has a cold wall refrigeration system provided with adjustable expansion valves. Rail has an adjustable evaporator pressure regulator valve located in the 6" (15.2 cm) mechanical area at right end. Unit is designed to maintain 0°F (-18°C) to 5°F (-15°C) in the tank and 33°F (1°C) to 40°F (4°C) in the rail.
- Electrical Connections : are 115 volt, 60 Hertz, single phase.
Width : 36"
Depth : 311/2"
Height : 463/8"
Weight : 285 lb
Specification Sheet
DSF13BR
F13WC
31.5" (80cm) Deep Self-Contained Low Temp, Ice Cream Cabinets without Syrup Rail
- Interior : is constructed of 22-gauge stainless steel. Liner is insulated with 2.5" (6.4 cm) foamed-in-place polyurethane. Unit has cold wall refrigeration system provided with adjustable expansion valve and is designed to maintain 0°F (-18°C) to 5°F (-15°C).
- Exterior Front : has 22-gauge stainless steel front panel(s). Exterior ends are constructed of 18-gauge galvanized steel. Unit has condensing unit on right end of cabinet and is wired with cord and plug. Housing for condensing unit has a louvered front panel. A low pressure control, with adjustment knob, regulates temperature in cabinet.
- Electrical Connections : are 115 volt, 60 Hertz, single phase.
Width : 32"
Depth : 311/2"
Height : 40"
Weight : 311 lb
Specification Sheet
DSF13WC
F13WR
31.5" (80cm) Deep Remote Low Temp, Ice Cream Cabinets
- Interior : is constructed of 22-gauge stainless steel. Liner is insulated with 2.5" (6.4 cm) foamed-in-place polyurethane. Unit has a cold wall refrigeration system provided with adjustable expansion valve located in the 6" (15.2 cm) mechanical area at right end. Unit is designed to maintain 0°F (-18°C) to 5°F (-15°C).
- Exterior : front has 22-gauge stainless steel front panel(s). Exterior ends are constructed of 18-gauge galvanized steel.
- Electrical Connections : are 115 volt, 60 Hertz, single phase. Unit must be hard wired.
Width : 24"
Depth : 311/2"
Height : 40"
Weight : 195 lb
Specification Sheet
DSF13WR
F14EI
31.5 (80cm) Deep Electric Hot Food Tables - Individual Wells
- Top : Top to have (2) to (6) 11.87" x 19.87" (30.2cm x 50.5cm) openings. Infinite controls for individual 6.25" (15.9cm) deep wells are located below openings. Controls are mounted on the front edge of 8" (20.3cm) wide stainless steel plate shelf. Heating elements for each well are rated at 1000 watts for 208V or 1200 watts for 230V.
- Faucet : Manual fill faucet that extends 2.5" (6.4cm) above backsplash is standard
- Shelf : Lower portion of unit to have 22-gauge stainless steel open shelf
Width : 32"
Depth : 311/2"
Height : 40"
Weight : 216 lb
Specification Sheet
DSF14EI
F14EW
31.50" (80 cm) Deep Electric Hot Food Tables Single Tank
- Top : to have 11.87"x 19.87" (30.2cm x 50.5cm) openings to hold pans (supplied by others). Unit has (1) 16-gauge stainless steel tank with 1" (2.5cm) drain with gate valve. Units 32", 48" or 60" in length have (1) 5 kw electric immersion heater; 72" and 88" lengths have (2) 5 kw electric immersion heaters located beneath openings. Heaters are standard at 240V, single phase (*208V available upon request). Control to be mounted in front edge of 8" (20.3cm) wide stainless steel plate shelf.
- Faucet : Manual fill faucet that extends 2.5" (6.4cm) above backsplash is standard
- Shelf : Lower portion of unit to have 22-gauge stainless steel open shelf
Width : 32"
Depth : 311/2"
Height : 40"
Weight : 216 lb
Specification Sheet
DSF14EW
F14GW
31.50" (80 cm) Deep Single-Tank Natural Gas Hot Food Tables
- Top : has (2) to (6) 11.87" x 19.87" (30.2cm x 50.5 cm) openings to hold pans (supplied by others). Unit has a single 16-gauge stainless steel tank with 1.00" (2.5 cm) drain with gate valve. Units 32", 48" and 60" have (1) 20,000 BTU natural gas burner with safety pilots evenly spaced under the tank and (1) control. 72 and 88" units have (2) 20,000 BTU natural gas burners with safety pilots evenly spaced under the tank and (2) controls. Control is mounted in front edge of 8" wide stainless steel plate shelf.
- Natural Gas Connection : is 1/2"; a gas regulator is supplied. Hot water connection is 1/2", located 36" (91.4 cm) above the floor.
- Manual Fill Faucet : that extends (2.5" (6.4cm) above backsplash is standard.
Width : 32"
Depth : 311/2"
Height : 40"
Weight : 256 lb
Specification Sheet
DSF14GW
F15MC48D, F15MC72D F15 Serview
Mirrored Self-Contained Refrigerated Display Cases
- Exterior : Display exterior sides are made of 18-gauge stainless steel
- Interior : ABS plastic interior sides with molded shelf supports
- Shelves : (4) adjustable epoxy coated wire shelves
Width : 48"
Depth : 311/2"
Height : 78"
Weight : -
Specification Sheet
DSF15MCD
F15MC48N, F15MC72N F15 Serview
Mirrored Self-Contained Refrigerated Display Cases
- Exterior : Display exterior sides are made of 18-gauge stainless steel
- Interior : ABS plastic interior sides with molded shelf supports
- Shelves : (4) adjustable epoxy coated wire shelves
Width : 48"
Depth : 311/2"
Height : 78"
Weight : 748 lb
Specification Sheet
DSF15MCN
F15MR48D, F15MR72D F15 Serview
Mirrored Remote Refrigerated Display Cases
- Exterior : Display exterior sides are made of 18-gauge stainless steel
- Interior : ABS plastic interior sides with molded shelf supports
- Shelves : (4) adjustable epoxy coated wire shelves
Width : 48"
Depth : 311/2"
Height : 78"
Weight : 708 lb
Specification Sheet
DSF15MRD
F15MR48N, F15MR72N F15 Serview
Mirrored Remote Refrigerated Display Cases
- Exterior : Display exterior sides are made of 18-gauge stainless steel
- Interior : ABS plastic interior sides with molded shelf supports
- Shelves : (4) adjustable epoxy coated wire shelves
Width : 48"
Depth : 311/2"
Height : 78"
Weight : 668 lb
Specification Sheet
DSF15MRN
F15PC48D, F15PC72D F15 Serview
Pass-Through Self-Contained Refrigerated Display Cases
- Exterior : Display exterior sides are made of 18-gauge stainless steel
- Interior : ABS plastic interior sides with molded shelf supports
- Shelves : (4) adjustable epoxy coated wire shelves
Width : 48"
Depth : 333/8"
Height : 78"
Weight : 807 lb
Specification Sheet
DSF15PCD
F15PC48N, F15PC72N F15 Serview
Pass-Through Self-Contained Refrigerated Display Cases
- Exterior : Display exterior sides are made of 18-gauge stainless steel
- Interior : ABS plastic interior sides with molded shelf supports
- Shelves : (4) adjustable epoxy coated wire shelves
Width : 48"
Depth : 333/8"
Height : 78"
Weight : 787 lb
Specification Sheet
DSF15PCN
F15PR48D, F15PR72D F15 Serview
Pass-Through Remote Refrigerated Display Cases
- Exterior : Display exterior sides are made of 18-gauge stainless steel
- Interior : ABS plastic interior sides with molded shelf supports
- Shelves : (4) adjustable epoxy coated wire shelves
Width : 48"
Depth : 333/8"
Height : 78"
Weight : 749 lb
Specification Sheet
DSF15PRD
F15PR48N, F15PR72N F15 Serview
Pass-Through Remote Refrigerated Display Cases
- Exterior : Display exterior sides are made of 18-gauge stainless steel
- Interior : ABS plastic interior sides with molded shelf supports
- Shelves : (4) adjustable epoxy coated wire shelves
Width : 48"
Depth : 333/8"
Height : 78"
Weight : 727 lb
Specification Sheet
DSF15PRN
F15SC48D, F15SC72D F15 Serview
See-Through Self-Contained Refrigerated Display Cases
- Exterior : Display exterior sides are made of 18-gauge stainless steel
- Interior : ABS plastic interior sides with molded shelf supports
- Shelves : (4) adjustable epoxy coated wire shelves
Width : 48"
Depth : 333/8"
Height : 78"
Weight : 786 lb
Specification Sheet
DSF15SCD
F15SC48N, F15SC72N F15 Serview
See-Through Self-Contained Refrigerated Display Cases
- Exterior : Display exterior sides are made of 18-gauge stainless steel
- Interior : ABS plastic interior sides with molded shelf supports
- Shelves : (4) adjustable epoxy coated wire shelves
Width : 48"
Depth : 333/8"
Height : 78"
Weight : 745 lb
Specification Sheet
DSF15SCN
F15SR48D, F15SR72D F15 Serview
See-Through Remote Refrigerated Display Cases
- Exterior : Display exterior sides are made of 18-gauge stainless steel
- Interior : ABS plastic interior sides with molded shelf supports
- Shelves : (4) adjustable epoxy coated wire shelves
Width : 48"
Depth : 333/8"
Height : 78"
Weight : 728 lb
Specification Sheet
DSF15SRD
F15SR48N, F15SR72N F15 Serview
See-Through Remote Refrigerated Display Cases
- Exterior : Display exterior sides are made of 18-gauge stainless steel
- Interior : ABS plastic interior sides with molded shelf supports
- Shelves : (4) adjustable epoxy coated wire shelves
Width : 48"
Depth : 333/8"
Height : 78"
Weight : 706 lb
Specification Sheet
DSF15SRN
F16DD
31.5" (80cm) Deep Drawer Base Utility Stands
Width : 19"
Depth : 311/2"
Height : 40"
Weight : 195 lb
Specification Sheet
DSF16DD
F16HD
31.5" (80cm) Deep Hinged Door Base Utility Stands
Width : 27"
Depth : 311/2"
Height : 40"
Weight : 210 lb
Specification Sheet
DSF16HD
F16OS
31.5" (80cm) Deep Open Shelf Utility Stands
Width : 36"
Depth : 311/2"
Height : 40"
Weight : 230 lb
Specification Sheet
DSF16OS
F16SD
31.5" (80cm) Deep Sliding Door Utility Stands
Width : 36"
Depth : 311/2"
Height : 40"
Weight : 260 lb
Specification Sheet
DSF16SD
F17C
Self-Contained Refrigerated Base Equipment Stands
- Refrigerated Base : Refrigerated base interior back and bottom is constructed of 22-gauge 2BF stainless steel. Exterior sides are constructed of 18-gauge stainless steel. Bottom and back are made of 22 gauge galvanized steel. Both left and right interior sides are formed of ABS plastic. The base is injected with 2.00" of high density polyurethane foam between the exterior and interior. Refrigerated base fronts are made of .095" thick ABS thermoformed plastic and backed up by ridged polyurethane water blown injection molded frames. The frames are an excellent thermo-break and superior structural material for fastening doors and drawers. Exterior machine compartment side is constructed of 18-gauge galvanized steel.
- Bracket : Single units are supplied with wall-mounted bracket and threaded rod to allow installation of the unit against a solid surface. Units shipped, as part of a line-up do not come standard with a wall mounted bracket assembly.
- Drawer System : Full Extension Plus drawer system is a complete drawer system, which can operate independent of the unit itÂÂ’s installed in. Drawer system is sized to hold 12 x 20 x 4 “ deep hotel pans and smaller fractional pans. Drawer system is all stainless steel construction for maximum durability. Outer drawer track is made of 11-gauge stainless and held in place with 12-gauge up-right and cross supports. Drawer track rollers are made of Delrin™ 100 NC-10 and do not require grease for operation. Intermediate tracks are removable without tools and house DelfieldÂÂ’s “anti-friction binary roller system". Drawer boxes are designed with “easy pan grip flanges". Tracks are designed with a stay shut feature that holds the drawer gasket tight to the base front on uneven floors. Exterior drawer fronts are made of 22- gauge stainless steel; and an interior made of ABS plastic with formed in channels to house the snap-in dart style santoprene gasket. A 12-gauge galvanized brace is foamed in place to be an integral part of the drawer front assembly. Each drawer front is injected with 1.87" of high density polyurethane foam between the exterior and interior. Handles are recessed black plastic and held in with a positive lock system.
Width : 52"
Depth : 303/4"
Height : 40"
Weight : 230 lb
Specification Sheet
DSF17C
F17DD
Dry Drawer Equipment Stands
- Dry Drawer System : Dry drawer system is sized to hold 12 x 20 x 4 or 6" deep hotel pans and smaller fractional pans. Drawer track assembly is constructed of 11-gauge stainless steel and each set of tracks are mounted in individual galvanized boxes. Drawer track rollers are made of Delrin 100 NC-10 and do not require grease for operation. Intermediate tracks are removable without tools. Drawer boxes are designed with “easy pan grip flanges". Tracks are designed with a stay shut feature that holds the drawer tight to the base front on uneven floors. Exterior drawer fronts are made of 22-gauge stainless steel; and an interior stainless liner backed with 14-gauge braces. Handles are recessed black plastic and held in with a positive lock system.
- Leg Rails : Unit is supported with two 14-gauge leg rails that run the entire length of the unit. Leg rails are welded to the bottom drawer boxes and are tied together with two 12-gauge braces running front to back. Caster/leg boxes are welded inside the leg rail and 6.12" adjustable legs are mounted as standard with (4) 5/16" bolts.
Width : 32"
Depth : 303/4"
Height : 371/4"
Weight : 290 lb
Specification Sheet
DSF17DD
F17FC
Self-Contained Freezer Base Equipment Stands
- Refrigerated Base : Refrigerated base interior back and bottom is constructed of 22-gauge 2BF stainless steel. Exterior sides are made of 18-gauge stainless steel. Bottom and back are made of 22 gauge galvanized steel. Both left and right interior sides are formed of ABS plastic. The base is injected with 2.00" of high density polyurethane foam between the exterior and interior. Refrigerated base fronts are made of .095" thick ABS thermoformed plastic and backed up by ridged polyurethane water blown injection molded frames. The frames are an excellent thermobreak and superior structural material for fastening doors and drawers. Exterior machine compartment side is constructed with 18-gauge galvanized steel.
- Single Units : Single units are supplied with a wall-mounted bracket and threaded rod to allow installation of the unit against a solid surface. Units shipped as part of a line-up do not come standard with a wall mounted bracket assembly.
- Drawer System : Full Extension Plus drawer system is a complete drawer system, which can operate independent of the unit itÂÂs installed in. Drawer system is sized to hold 12 x 20 x 4 ÂÂ deep hotel pans and smaller fractional pans. Drawer system is all stainless steel construction for maximum durability. Outer drawer track is made of 11-gauge stainless and held in place with 12-gauge up right and cross supports. Drawer track rollers are made of DelrinÂÂ 100 NC-10 and do not require grease for operation. Intermediate tracks are removable without tools and house DelfieldÂÂs ÂÂanti-friction binary roller system". Drawer boxes are designed with ÂÂeasy pan grip flanges". Tracks are designed with a stay shut feature that holds the drawer gasket tight to the base front on uneven floors. Exterior drawer fronts are made of 22- gauge stainless steel; and an interior made of ABS plastic with formed in channels to house the snap-in dart style santoprene gasket. A 12-gauge galvanized brace is foamed in place to be an integral part of the drawer front assembly. Each drawer front is injected with 1.87" of high density polyurethane foam between the exterior and interior. Handles are recessed black plastic and held in with a positive lock system.
Width : 60"
Depth : 303/4"
Height : 40"
Weight : 450 lb
Specification Sheet
DSF17FC
F17FR
Remote Freezer Base Equipment Stands
- Refrigerated Base : Refrigerated base interior back and bottom is constructed of 22-gauge 2BF stainless steel. Exterior sides are made of 18-gauge stainless steel. Bottom and back are made of 22 gauge galvanized steel. Both left and right interior sides are formed of ABS plastic. The base is injected with 2.00" of high density polyurethane foam between the exterior and interior. Refrigerated base fronts are made of .095" thick ABS thermoformed plastic and backed up by ridged polyurethane water blown injection molded frames. The frames are an excellent thermobreak and superior structural material for fastening doors and drawers. Exterior machine compartment side is constructed with 18-gauge galvanized steel.
- Single Units : Single units are supplied with a wall-mounted bracket and threaded rod to allow installation of the unit against a solid surface. Units shipped as part of a line-up do not come standard with a wall mounted bracket assembly.
- Drawer System : Full Extension Plus drawer system is a complete drawer system, which can operate independent of the unit itÂÂs installed in. Drawer system is sized to hold 12 x 20 x 4 ÂÂ deep hotel pans and smaller fractional pans. Drawer system is all stainless steel construction for maximum durability. Outer drawer track is made of 11-gauge stainless and held in place with 12-gauge up right and cross supports. Drawer track rollers are made of DelrinÂÂ 100 NC-10 and do not require grease for operation. Intermediate tracks are removable without tools and house DelfieldÂÂs ÂÂanti-friction binary roller system". Drawer boxes are designed with ÂÂeasy pan grip flanges". Tracks are designed with a stay shut feature that holds the drawer gasket tight to the base front on uneven floors. Exterior drawer fronts are made of 22- gauge stainless steel; and an interior made of ABS plastic with formed in channels to house the snap-in dart style santoprene gasket. A 12-gauge galvanized brace is foamed in place to be an integral part of the drawer front assembly. Each drawer front is injected with 1.87" of high density polyurethane foam between the exterior and interior. Handles are recessed black plastic and held in with a positive lock system.
Width : 48"
Depth : 303/4"
Height : 40"
Weight : 360 lb
Specification Sheet
DSF17FR
F17OS
Open Shelf Equipment Stands
- Brackets : Unit has stainless steel support brackets with full length removable 9.5" (24cm) wide x 1.25" (3.2cm) thick removable maple cutting board.
- Construction : Units sides and back are constructed of 18-gauge stainless steel.
- Steel Shelf : Unit has a 22-gauge stainless steel shelf, below equipment shelf, that is turned up 5.25" (13.3cm) in rear.
Width : 36"
Depth : 303/4"
Height : 36"
Weight : 200 lb
Specification Sheet
DSF17OS
F17R
Remote Refrigerated Base Equipment Stands
- Refrigerated Base : Refrigerated base interior back and bottom is constructed of 22-gauge 2BF stainless steel. Exterior sides are made of 18-gauge stainless steel. Bottom and back are made of 22 gauge galvanized steel. Both left and right interior sides are formed of ABS plastic. The base is injected with 2.00" of high density polyurethane foam between the exterior and interior. Refrigerated base fronts are made of .095" thick ABS thermoformed plastic and backed up by ridged polyurethane water blown injection molded frames. The frames are an excellent thermobreak and superior structural material for fastening doors and drawers. Exterior machine compartment side is constructed with 18-gauge galvanized steel.
- Single Units : Single units are supplied with a wall-mounted bracket and threaded rod to allow installation of the unit against a solid surface. Units shipped as part of a line-up do not come standard with a wall mounted bracket assembly.
- Drawer System : Full Extension Plus drawer system is a complete drawer system, which can operate independent of the unit itÂÂs installed in. Drawer system is sized to hold 12 x 20 x 4 ÂÂ deep hotel pans and smaller fractional pans. Drawer system is all stainless steel construction for maximum durability. Outer drawer track is made of 11-gauge stainless and held in place with 12-gauge up right and cross supports. Drawer track rollers are made of DelrinÂÂ 100 NC-10 and do not require grease for operation. Intermediate tracks are removable without tools and house DelfieldÂÂs ÂÂanti-friction binary roller system". Drawer boxes are designed with ÂÂeasy pan grip flanges". Tracks are designed with a stay shut feature that holds the drawer gasket tight to the base front on uneven floors. Exterior drawer fronts are made of 22- gauge stainless steel; and an interior made of ABS plastic with formed in channels to house the snap-in dart style santoprene gasket. A 12-gauge galvanized brace is foamed in place to be an integral part of the drawer front assembly. Each drawer front is injected with 1.87" of high density polyurethane foam between the exterior and interior. Handles are recessed black plastic and held in with a positive lock system.
Width : 44"
Depth : 303/4"
Height : 40"
Weight : 300 lb
Specification Sheet
DSF17R
F17VD
Component Crafted Versa Drawer Equipment Stand
- 4 temperature operation : each drawer is completely independent and can operate as a refrigerator, freezer, chiller or thaw cabinet at any time
- Control : Easy to use microprocessor control with push button function selection
- HAACP : HAACP electronic record keeping, alarm notifications and service diagnostics
Width : 84"
Depth : 303/4"
Height : 26"
Weight : 520 lb
Specification Sheet
DSF17VD
F18DC
31.5" (80cm) Deep Self-Contained Quick Glance Rail
- Construction : Exterior Back and Bottom are 24-gauge galvanized steel. Exterior ends are finished with 18-gauge galvanized steel.
- Base Interior : Base Interior has 22-gauge stainless steel back and bottom. Base interior ends and door frames are thermoformed ABS plastic. Base is insulated with 1.5" (3.8cm) high density foamed in place polyurethane. End of base has a machine compartment, standard on right, with condensing unit installed.
- Doors : Door(s) have a 22-gauge stainless steel exterior front, with thermoformed ABS plastic interior liner, black recessed handle and snap in magnetic gasket which is easily replaceable. Each interior door section has (1) removable epoxy coated wire shelf.
Width : 52"
Depth : 311/2"
Height : 433/4"
Weight : 520 lb
Specification Sheet
DSF18DC
F18DR
31.5" (80cm) Deep Remote Quick Glance Rail
- Construction : Exterior Back and Bottom are 24-gauge galvanized steel. Exterior ends are finished with 18-gauge galvanized steel.
- Base Interior : Base Interior has 22-gauge stainless steel back and bottom. Base interior ends and door frames are thermoformed ABS plastic. Base is insulated with 1.5" (3.8cm) high density foamed in place polyurethane. End of base has a machine compartment, standard on right, with condensing unit installed.
- Doors : Door(s) have a 22-gauge stainless steel exterior front, with thermoformed ABS plastic interior liner, black recessed handle and snap in magnetic gasket which is easily replaceable. Each interior door section has (1) removable epoxy coated wire shelf.
Width : 44"
Depth : 311/2"
Height : 433/4"
Weight : 485 lb
Specification Sheet
DSF18DR
F18FC
31.5" (80cm) Deep Self-Contained Freezer Base Work Tables
- Base Interior : Base interior has a 22-gauge stainless steel back and bottom. Interior ends and door frames to be thermoformed ABS plastic. Base is insulated with 1.5" (3.8cm) high density foamed in place polyurethane.
- Construction : Exterior back and bottom of base is constructed of 24-gauge galvanized steel. Exterior ends are constructed of 18-gauge galvanized steel.
- Doors : Door(s) have a thermoformed plastic ABS plastic interior liner and 22gauge stainless steel exterior front. Door(s) have black recessed handle(s)and a snap-in magnetic gasket which is easily replaceable. Unit is furnishedwith (1) epoxy coated wire shelf for each door section.
Width : -
Depth : 311/2"
Height : 40"
Weight : -
Specification Sheet
DSF18FC
F18FR
31.5" (80cm) Deep Remote Freezer Base Work Tables
- Base Interior : Base interior has a 22-gauge stainless steel back and bottom. Interior ends and door frames to be thermoformed ABS plastic. Base is insulated with 1.5" (3.8cm) high density foamed in place polyurethane.
- Construction : Exterior back and bottom of base is constructed of 24-gauge galvanized steel. Exterior ends are constructed of 18-gauge galvanized steel.
- Doors : Door(s) have a thermoformed plastic ABS plastic interior liner and 22 gauge stainless steel exterior front. Door(s) have black recessed handle(s) and a snap-in magnetic gasket which is easily replaceable. Unit is furnished with (1) epoxy coated wire shelf for each door section.
Width : 35"
Depth : 311/2"
Height : 40"
Weight : 310 lb
Specification Sheet
DSF18FR
F18MC
31.5" (80cm) Deep Self-Contained Mega Top Salad Tables
- Construction : Exterior back and bottom are 24-gauge galvanized steel. Exterior ends are 18-gauge galvanized steel.
- Base Interior : Base interior has 22-gauge stainless steel back and bottom. Interior ends and door frames are thermoformed ABS plastic. Base is insulated with 1.5" (3.8cm) of high-density foamed-in-place polyurethane.
- Doors : Door(s) have a 22-gauge stainless steel exterior front, with a thermoformed ABS plastic interior liner. Door(s) have a black recessed handle and a snap-in magnetic gasket which is easily replaceable.
Width : 39"
Depth : 311/2"
Height : 40"
Weight : 410 lb
Specification Sheet
DSF18MC
F18MR
31.5" (80cm) Deep Remote Mega Top Salad Tables
- Construction : Exterior back and bottom are 24-gauge galvanized steel. Exterior ends are 18-gauge galvanized steel.
- Base Interior : Base interior has 22-gauge stainless steel back and bottom. Interior ends and door frames are thermoformed ABS plastic. Base is insulated with 1.5" (3.8cm) of high-density foamed-in-place polyurethane.
- Doors : Door(s) have a 22-gauge stainless steel exterior front, with a thermoformed ABS plastic interior liner. Door(s) have a black recessed handle and a snap-in magnetic gasket which is easily replaceable.
Width : 31"
Depth : 311/2"
Height : 40"
Weight : 350 lb
Specification Sheet
DSF18MR
F18PD48
Self-Contained Refrigerated Dual Rail Prep Table with Flush Mount LiquiTec® Raised Rails
- Upper and lower rails are mechanically cooled utilizing LiquiTec® technology with die stamped 12"x20" openings
- Top is constructed of 16-gauge stainless steel
- Pans and adapter bars by others
Width : 48"
Depth : 311/2"
Height : 55"
Weight : 691 lb
Specification Sheet
DSF18PD
F18PD72
Self-Contained Refrigerated Dual Rail Prep Table with Flush Mount LiquiTec® Raised Rails
- Upper and lower rails are mechanically cooled utilizing LiquiTec® technology with die stamped 12"x20" openings
- Top is constructed of 16-gauge stainless steel
- Pans and adapter bars by others
Width : 72"
Depth : 311/2"
Height : 55"
Weight : 873 lb
Specification Sheet
DSF18PD
F18RC
31.5" (80cm) Deep Self-Contained Refrigerated Reduced Height Rail
- Construction : Exterior back and bottom are 24-gauge galvanized steel. Exterior ends are 18-gauge galvanized steel.
- Base Interior : Base Interior has 22-gauge stainless steel back and bottom. Base interior ends and door frames are thermoformed ABS plastic. Base is insulated with 1.5" (3.8cm) high density foamed in place polyurethane. End of base has a machine compartment, standard on right, with condensing unit installed.
- Doors : Door(s) have a 22-gauge stainless steel exterior front, with a thermoformed ABS plastic interior liner. Door(s) have a black recessed handle and a snap-in magnetic gasket which is easily replaceable.
Width : 52"
Depth : 311/2"
Height : 42"
Weight : 520 lb
Specification Sheet
DSF18RC
F18RC119-ES1
Pizza Production Center
- Top is constructed of 16-gauge stainless steel :
- Environmentally friendly foam : High density environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane foam throughout unit
- Snap-in dart style vinyl magnetic gaskets :
Width : 1187/8"
Depth : 317/8"
Height : 5913/16"
Weight : 981 lb
Specification Sheet
DSPIZZACENTER
F18RC93-BPL
Pasta Production Center
- Self contained refrigerated base with heavy duty drawers
- Drawers are backed by a 10-year warranty on the track assembly
- Self contained LiquiTec® cold pan
Width : 92"
Depth : 38"
Height : 4415/16"
Weight : 1254 lb
Specification Sheet
DSPASTACENTER
F18RR
31.5" (80cm) Deep Remote Reduced Height Rail
- Construction : Exterior back and bottom are 24-gauge galvanized steel. Exterior ends are 18-gauge galvanized steel.
- Base Interior : Base Interior is 22-gauge stainless steel back and bottom. Base interior ends and door frames are thermoformed ABS plastic. Base is insulated with 1.5" (3.8cm) high density foamed in place polyurethane.
- Doors : Door(s) have a 22-gauge stainless steel exterior front, with a thermoformed ABS plastic interior liner. Door(s) have a black recessed handle and a snap-in magnetic gasket which is easily replaceable.
Width : 44"
Depth : 311/2"
Height : 42"
Weight : 485 lb
Specification Sheet
DSF18RR
F18SC
31.5" (80cm) Deep Self-Contained Refrigerated Salad Top Tables
- Construction : Exterior back and bottom to be 24-gauge galvanized steel. Exterior ends are 18-gauge galvanized steel.
- Base Interior : Base Interior is 22-gauge stainless steel back and bottom. Base interior ends and door frames are thermoformed ABS plastic. Base is insulated with 1.5" (3.8cm) high density foamed in place polyurethane.
- Doors : Door(s) have a 22-gauge stainless steel exterior front, with a thermoformed ABS plastic interior liner. Door(s) have a black recessed handle and a snap-in magnetic gasket which is easily replaceable.
Width : 39"
Depth : 311/2"
Height : 40"
Weight : 400 lb
Specification Sheet
DSF18SC
F18SR
31.5" (80cm) Deep Remote Refrigerated Salad Top Tables
- Construction : Exterior back and bottom to be 24-gauge galvanized steel. Exterior ends are 18-gauge galvanized steel.
- Base Interior : Base Interior is 22-gauge stainless steel back and bottom. Base interior ends and door frames are thermoformed ABS plastic. Base is insulated with 1.5" (3.8cm) high density foamed in place polyurethane.
- Doors : Door(s) have a 22-gauge stainless steel exterior front, with a thermoformed ABS plastic interior liner. Door(s) have a black recessed handle and a snap-in magnetic gasket which is easily replaceable.
Width : 31"
Depth : 311/2"
Height : 40"
Weight : 340 lb
Specification Sheet
DSF18SR
F18VD
Component Crafted Versa Drawer
- 4 temperature operation : each drawer is completely independent and can operate as a refrigerator, freezer, chiller or thaw cabinet at any time
- Control : Easy to use microprocessor control with push button function selection
- Alarm notifications and service diagnostics
Width : 50"
Depth : 311/2"
Height : 40"
Weight : 520 lb
Specification Sheet
DSF18VD
F18WC
31.5" (80cm) Deep Self-Contained Refrigerated Work Tables
- Construction : Exterior back and bottom to be 24-gauge galvanized steel. Exterior ends are 18-gauge galvanized steel.
- Base Interior : Base Interior is 22-gauge stainless steel back and bottom. Base interior ends and door frames are thermoformed ABS plastic. Base is insulated with 1.5" (3.8cm) high density foamed in place polyurethane.
- Doors : Door(s) have a 22-gauge stainless steel exterior front, with a thermoformed ABS plastic interior liner. Door(s) have black recessed handle(s) and a snap-in magnetic gasket which is easily replaceable. Each interior door section has (1) removable epoxy-coated wire shelf.
Width : 39"
Depth : 311/2"
Height : 40"
Weight : 365 lb
Specification Sheet
DSF18WC
F18WR
31.5" (80cm) Deep Remote Refrigerated Work Tables
- Construction : Exterior back and bottom to be 24-gauge galvanized steel. Exterior ends are 18-gauge galvanized steel.
- Base Interior : Base Interior is 22-gauge stainless steel back and bottom. Base interior ends and door frames are thermoformed ABS plastic. Base is insulated with 1.5" (3.8cm) high density foamed in place polyurethane.
- Doors : Door(s) have a thermoformed plastic ABS plastic interior liner and 22- gauge stainless steel exterior front. Door(s) have black recessed handle(s) and a snap-in magnetic gasket which is easily replaceable. Unit is furnished with (1) epoxy coated wire shelf for each door section.
Width : 31"
Depth : 311/2"
Height : 40"
Weight : 345 lb
Specification Sheet
DSF18WR
F2600, F2700
Low-Profile Freezer Base Equipment Stands
- Interior : Interior subtop is 22-gauge stainless steel, with foamed-in-place polyurethane insulation. Interior back and bottom are 22-gauge stainless steel. Interior sides are ABS plastic. Unit is supplied with a wall bracket and threaded rod to allow installation of the unit against a solid surface.
- Drawer Frames : Drawer frames are 14-gauge stainless steel. Drawer slides are 14-gauge stainless steel, with stainless steel bearings. Drawer fronts are 32.00" (81.3 cm) wide, and are 22-gauge stainless steel. Interior of drawer fronts is ABS plastic over polyurethane foam insulation. Each drawer holds (2) 12.00" x 20.00" x 4.00" deep (30.5 cm x 50.8 cm x 10.2 cm deep) pans, supplied by others.
- Legs/Casters : Unit is mounted on 6.13" (15.6cm) high adjustable stainless steel legs or casters. Add a "C" to the model number when ordering with casters.
Width : 481/4"
Depth : 31"
Height : 26"
Weight : 295 lb
Specification Sheet
DSF2600_2700
F2800, F2900C
Low-Profile Refrigerated Base Equipment Stands
- Refrigerated Base : Refrigerated base has 22 gauge stainless steel interior back and bottom with ABS thermoformed sides. Base exterior back, bottom and sides are constructed of galvanized steel.
- Stainless Steel Ends : Finished stainless steel ends are standard. Louver, coil panel and drawer faces are all standard with stainless steel construction. (Unit is supplied with a wall-mounted bracket and threaded rod to allow installation of the unit against a solid surface.)
- Legs/Casters : Units foundation is made of 14 gauge 1.50" x 3.25" thick galvanized leg rails with casters as standard. Unit comes standard with a stainless steel leg rail cover-up skin. Legs available on request.
Width : 521/4"
Depth : 31"
Height : 26"
Weight : 278 lb
Specification Sheet
DSF2800
F2984VDL, F2984VDR
Versa Drawer
- VersaDrawer features a unique 4 temperature operation. Each drawer is completely independent and can operate as a refrigerator, freezer, chiller or thaw cabinet at any time.
- VersaDrawer features an easy to use microprocessor control with push button function selection.
- Alarm notifications and service diagnostics.
Width : 84"
Depth : 311/2"
Height : 26"
Weight : 520 lb
Specification Sheet
DSF2900VD
F5MC48D, F5MC72D F5 Serview Drop In
30" Deep Mirrored Self-Contained Refrigerated Display Cases
- Sides : Display exterior sides are made of 18-gauge stainless steel
- Interior : ABS plastic interior sides with molded shelf supports
- Shelves : (4) adjustable epoxy coated wire shelves
Width : 48"
Depth : 32"
Height : 32"
Weight : 590 lb
Specification Sheet
DSF5MCD
F5MC48N, F5MC72N
24" Deep Mirrored Self Containied Refrigerated Display Case
- Exterior : Sode sare ,ade pf 18-gauge Stainless steel
- Interior : Interior is molded ABS with molded shelf supports
- 4 adjustable epoxy coated wire shelves
Width : 47"
Depth : 25"
Height : 567/8"
Weight : 415 lb
Specification Sheet
DSF5MCN
F5MR48D, F5MR72D F5 Serview Drop In
30" Deep Mirrored Remote Refrigerated Display Cases
- Sides : Display exterior sides are made of 18-gauge stainless steel
- Interior : ABS plastic interior sides with molded shelf supports
- Shelves : (4) adjustable epoxy coated wire shelves
Width : 48"
Depth : 32"
Height : 32"
Weight : 485 lb
Specification Sheet
DSF5MRD
F5MR48N, F5MR72N F5 Serview Drop In
24" Deep Mirrored Remote Refrigerated Display Cases
- Sides : Display exterior sides are made of 18-gauge stainless steel
- Interior : ABS plastic interior sides with molded shelf supports
- Shelves : (4) adjustable epoxy coated wire shelves
Width : 48"
Depth : 26"
Height : 26"
Weight : 390 lb
Specification Sheet
DSF5MRN
F5PC48D, F5PC72D F5 Serview Drop In
30" Deep Pass Through Self-Contained Refrigerated Display Cases
- Sides : Display exterior sides are made of 18-gauge stainless steel
- Interior : ABS plastic interior sides with molded shelf supports
- Shelves : (4) adjustable epoxy coated wire shelves
Width : 48"
Depth : 34"
Height : 34"
Weight : 609 lb
Specification Sheet
DSF5PCD
F5PC48N, F5PC72N F5 Serview Drop In
24" Deep Pass Through Self-Contained Refrigerated Display Cases
- Sides : Display exterior sides are made of 18-gauge stainless steel
- Interior : ABS plastic interior sides with molded shelf supports
- Shelves : (4) adjustable epoxy coated wire shelves
Width : 48"
Depth : 28"
Height : 28"
Weight : 423 lb
Specification Sheet
DSF5PCN
F5PR48D, F5PR72D F5 Serview Drop In
30" Deep Pass Through Remote Refrigerated Display Cases
- Sides : Display exterior sides are made of 18-gauge stainless steel
- Interior : ABS plastic interior sides with molded shelf supports
- Shelves : (4) adjustable epoxy coated wire shelves
Width : 48"
Depth : 34"
Height : 34"
Weight : 497 lb
Specification Sheet
DSF5PRD
F5PR48N, F5PR72N F5 Serview Drop In
24" Deep Pass Through Remote Refrigerated Display Cases
- Sides : Display exterior sides are made of 18-gauge stainless steel
- Interior : ABS plastic interior sides with molded shelf supports
- Shelves : (4) adjustable epoxy coated wire shelves
Width : 48"
Depth : 28"
Height : 28"
Weight : 398 lb
Specification Sheet
DSF5PRN
F5SC48D, F5SC72D F5 Serview Drop In
30" Deep See Through Self-Contained Refrigerated Display Cases
- Sides : Display exterior sides are made of 18-gauge stainless steel
- Interior : ABS plastic interior sides with molded shelf supports
- Shelves : (4) adjustable epoxy coated wire shelves
Width : 48"
Depth : 32"
Height : 32"
Weight : 590 lb
Specification Sheet
DSF5SCD
F5SC48N, F5SC72N F5 Serview Drop In
24" Deep See Through Self-Contained Refrigerated Display Cases
- Sides : Display exterior sides are made of 18-gauge stainless steel
- Interior : ABS plastic interior sides with molded shelf supports
- Shelves : (4) adjustable epoxy coated wire shelves
Width : 48"
Depth : 28"
Height : 23"
Weight : 433 lb
Specification Sheet
DSF5SCN
F5SR48D, F5SR72D F5 Serview Drop In
30" Deep See Through Remote Refrigerated Display Cases
- Sides : Display exterior sides are made of 18-gauge stainless steel
- Interior : ABS plastic interior sides with molded shelf supports
- Shelves : (4) adjustable epoxy coated wire shelves
Width : 48"
Depth : 34"
Height : 34"
Weight : 540 lb
Specification Sheet
DSF5SRD
F5SR48N, F5SR72N F5 Serview Drop In
24" Deep See Through Remote Refrigerated Display Cases
- Sides : Display exterior sides are made of 18-gauge stainless steel
- Interior : ABS plastic interior sides with molded shelf supports
- Shelves : (4) adjustable epoxy coated wire shelves
Width : 48"
Depth : 28"
Height : 28"
Weight : 408 lb
Specification Sheet
DSF5SRN
FT2-SN Shelleymatic
Mobile open frame multi-stack tray and rack dispensers
- Housing : Center housing shall be two-piece molded fiberglass, specify color, with stainless steel corners. The fiberglass reinforced polyester (F.R.P.) shall be molded with permanent color. Center housing top shall be 16-gauge stainless steel. Top should contain two Shelleymatic model ND drop-in napkin dispensers.
- Bin : Silverware bin shall be stainless steel, welded and polished, with ten holes to accept silverware cylinders. Silverware bin shall be provided with 10 plastic silverware cylinders. Unit shall have 4.00" (10.2cm) diameter polyolefin swivel casters (all locking), and non-marking gray bumpers at each corner.
- Dispenser : Dispenser platform carrier shall be 18-gauge stainless steel and shall be removable for cleaning. Each dispenser shall have two self-leveling mechanisms.
Width : 433/4"
Depth : 221/8"
Height : 563/8"
Weight : 284 lb
Specification Sheet
DSFT2_SN
GoCart mobile kiosk
Wash Station
- Stainless steel construction and finish
- Available in single, double or triple sink configurations
- 5 gallon water storage
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSGCWASH
GoCart mobile kiosk - Gullwing
Gullwing
- Stainless steel construction and finish
- Gullwing doors
- Integrated food vending unit containing water tank, pump and filter system, hot water heater, waste water tank, hot and cold water taps and wash sinks
Width : 150"
Depth : 935/16"
Height : 88"
Weight : 1279 lb
Specification Sheet
DSGCGULL
GoCart mobile kiosk - MINI
Mini mobile kiosk
- Stainless steel construction and finish
- Interior storage shelf
- Removable frame cap for umbrella fitting
Width : 98"
Depth : 34"
Height : 421/8"
Weight : 505 lb
Specification Sheet
DSGCMINI
GoCart mobile kiosk - MINICOF
Mini Coffee mobile kiosk
- Stainless steel construction and finish
- 5 gallon water storage
- Water pump and filter
Width : 98"
Depth : 34"
Height : 421/8"
Weight : 539 lb
Specification Sheet
DSGCMINICOF
GoCart mobile kiosk - Non Food
Gullwing Non Food
- Stainless steel construction and finish
- Gullwing doors
- Energy management system
Width : 150"
Depth : 935/16"
Height : 88"
Weight : 1346 lb
Specification Sheet
DSGCNF
KC, KC-NU Shelleyglas
Mobile All-Purpose Counters
- Exterior Top : is constructed of 14-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners.
- Casters : Units are mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6" (15.2cm).
Width : 28"
Depth : 30"
Height : 36"
Weight : 165 lb
Specification Sheet
GSKC
KCF Shelleyglas
Mobile Ice Cream Counters
- Exterior Top : is constructed of 14-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners. Top has two die-stamped openings and is provided with hinged removable lids. Lids are constructed of stainless steel and have a rubber gasket seal.
- Casters : Units are mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6" (15.2cm).
- Freezer Compartment : has a water-tight inner liner constructed of 22-gauge stainless steel, with radius corners and 1.5" (3.8cm) of polyurethane insulation. Freezer compartment is equipped with drain plumbed to a drain valve located in the bottom of the counter. Freezer compartment is equipped with automatic self-leveling, field-adjustable elevators. Divider trays are supplied.
Width : 36"
Depth : 30"
Height : 36"
Weight : 475 lb
Specification Sheet
DSKCF
KCFM Shelleyglas
Mobile Milk and Ice Cream Counters
- Exterior Top : is constructed of 14-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners. Top has two die-stamped openings and is provided with hinged removable lids. Lids are constructed of stainless steel and have a rubber gasket seal.
- Casters : Units are mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6" (15.2cm).
- Refrigerated and Freezer Compartments : unit has one refrigerated and one freezer compartment each. Compartments have water-tight inner liner constructed of 22-gauge stainless steel, with radius corners and 1.5" (3.8cm) of polyurethane insulation. Both compartments are equipped with a drain plumbed to a drain valve located in the bottom of the unit. Refrigerated and freezer compartments are equipped with automatic self leveling, field adjustable elevators. Divider trays are supplied.
Width : 50"
Depth : 30"
Height : 36"
Weight : 500 lb
Specification Sheet
DSKCFM
KCFT-NU Shelleyglas
Mobile Self-Contained Frost Top Serving Counters
- Exterior Top : is constructed of 14-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners.
- Casters : Units are mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6" (15.2cm).
- Frost Top : is 18-gauge stainless steel, one-piece construction and perimeter trough. Underside of frost top is sealed with refrigeration lines and insulated with high-density, closed cell polyurethane. Frost top assembly is enclosed in a galvanized steel jacket.
Width : 30"
Depth : 30"
Height : 36"
Weight : 380 lb
Specification Sheet
DSKCFTNU
KCI, KCI-NU Shelleyglas
Mobile Ice Pan Serving Counters
- Exterior Top : is constructed of 14-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners.
- Casters : Units are mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6" (15.2cm).
- Insulated Ice Pan : is 7" (17.8cm) deep and constructed of 22-gauge stainless steel. A removable, perforated false bottom 1" (2.5cm) high, constructed of stainless steel, is supplied. The ice pan is separated from the exterior top by a Therma Brake and fully insulated with foam in place polyurethane insulation. Ice pan is equipped with a 1" (2.5cm) I.P.S. drain plumbed to drain valve located at the bottom of the unit.
Width : 36"
Depth : 30"
Height : 36"
Weight : 240 lb
Specification Sheet
GSKCI
KCM Shelleyglas
Mobile Milk Counters
- Exterior Top : is constructed of 14-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners. Top has one (KCM-36), two (KCM-50), three (KCM-60) or four (KCM-74) die-stamped openings and is provided with hinged removable lids. Lids are constructed of stainless steel and have a rubber gasket seal.
- Casters : Units are mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6" (15.2cm).
- Refrigerated Compartment : have water-tight inner liner constructed of 22-gauge stainless steel, with radius corners and 1.5" (3.8cm) of polyurethane insulation. Compartment is equipped with a drain plumbed to a drain valve located in the bottom of the unit. Refrigerated compartment is equipped with automatic self leveling, field adjustable elevators. Divider trays are supplied.
Width : 36"
Depth : 30"
Height : 36"
Weight : 400 lb
Specification Sheet
DSKCM
KCS Shelleyglas
Mobile Cashier's Counters
- Exterior Top : is constructed of 14-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners. A 2" (5.1cm) ferruled hole is located at the rear of the top to allow cord access for cash registers.
- Casters : Units are mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6" (15.2cm).
- Interior Lining : at the cashier's end is 18-gauge stainless steel, with a stainless steel bottom shelf. Unit has an 16.5" x 16.5" x 5" (42cm x 42cm x 12.7cm) stainless steel cash drawer with lock and key.
Width : 30"
Depth : 30"
Height : 36"
Weight : 180 lb
Specification Sheet
GSKCS
KCSC-B Shelleyglas
Mobile Self-Contained Cold Pan Serving Counters
- Exterior Top : is constructed of 14-gauge stainless steel, welded, ground and polished into one integral unit. The refrigerated cold pan is 7" (17.8cm) deep and constructed of stainless steel. The cold pan is separated from the exterior top by a thermal break. Copper refrigeration tubing is attached to the sides of the cold pan and is fully insulated with foamed in place polyurethane insulation. Cold pan is equipped with a 1" (2.5cm) I.P.S. drain with drain valve located at the bottom of the unit. Temperatures of 33°F (1°C) to 41°F (5°C) are maintained with pans recessed 3" (7.6cm) at 86°F ambient room temperature. Pans (by others) rest on a stainless steel bracket.
- Casters : Units are mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6" (15.2cm).
- Refrigerant System : uses HFC-404A refrigerant and has a self-contained 115 volt, 60 Hertz, single phase hermetically sealed condensing unit with adjustable cold pan pressure control. Unit is wired with a 3-wire, grounded, maximum 10' (3m) cord and plug. Unit has an on/off switch mounted on the exterior.
Width : 36"
Depth : 30"
Height : 36"
Weight : 350 lb
Specification Sheet
DSKCSCB
KCSC-EF Shelleyglas
Mobile Self-Contained LiquiTec Cold Pan Serving Counters
- Exterior Top : is constructed of 14-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners. Top has two die-stamped openings and is provided with hinged removable lids. Lids are constructed of stainless steel and have a rubber gasket seal.
- Casters : Units are mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6" (15.2cm).
- The LiquiTec cold pan : has 2-6 die stamped 19.87" x 11.87" (50.5cm x 30.2cm) openings with depressed edges. Formed well below each opening is 6.25" (15.9cm) deep with .5" drain mainfold to gate valve. Each well, flush with the top, for flush mount pans to accommodate12" x 20" (30.5cm x 50.8cm) pans 4" (7.6cm) or 6" (15.2cm) deep, supplied by others. Product temperatures of 33°F (1°C) to 41°F (5°C) are maintained at 86°F (30°C) ambient room temperature, meeting NSF7 requirements. The cold pan is separated from the exterior top by a thermal break. Copper refrigeration tubing is attached to the sides of every well. Eutectic fluid is used as the heat transfer medium. Cold pan is fully insulated with foamed in place polyurethane insulation.
Width : 36"
Depth : 30"
Height : 36"
Weight : 350 lb
Specification Sheet
GSEF
KCTS Shelleyglas
Mobile Tray and Silver Stands
- Exterior Top : is constructed of 14-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners. Top has area for silverware with stepdown for trays.
- Casters : Units are mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6" (15.2cm).
Width : 30"
Depth : 28"
Height : 36"
Weight : 150 lb
Specification Sheet
GSKCTS
KCU, KCU-NU Shelleyglas
Mobile Beverage Counters
- Exterior Top : is constructed of 14-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners. Top is reinforced and includes a stainless steel drain trough with a removable stainless steel anti-splash drip gate. Drain trough has a 1" (2.5cm) I.P.S. drain plumbed to a drain valve located at the right bottom of the unit. Drain trough is located on the customer's side of counter top.
- Casters : Units are mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6" (15.2cm).
Width : 36"
Depth : 30"
Height : 36"
Weight : 200 lb
Specification Sheet
GSKCU
KH, KHNU Shelleyglas
Mobile Heated Serving Counters
- Exterior Top : is constructed of 14-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners. Top has two die-stamped openings and is provided with hinged removable lids. Lids are constructed of stainless steel and have a rubber gasket seal.
- Casters : Units are mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6" (15.2cm).
- Heated Food Warmers : are constructed of die-stamped stainless steel. Heated food warmers are insulated on bottom. Each heated food warmer is individually equipped with a heated element rated at 1000 watts for 120 volt or 208/230 volt, 60 hertz, single phase service and wired to an adjustable control switch and indicator light in the control panel. Heated food warmers are interwired to a minimum 10' (3m) long cord with a grounded plug for 120 volt or 208/230 volt, 60 hertz, single phase electrical service.
Width : 36"
Depth : 30"
Height : 36"
Weight : 380 lb
Specification Sheet
DSKH
KHC-NU Shelleyglas
Mobile Hot and Cold Combination Counters
- Exterior Top : is constructed of 14-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners.
- Casters : Units are mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6" (15.2cm).
- Top : is constructed of 14-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners. Top has one to four electrically heated, recessed, die-stamped stainless steel hot food warmers. Each warmer accommodates one 12.75" x 20.75" x 6" (32.4cm x 52.7cm x 15.2cm) pan.
Width : 60"
Depth : 30"
Height : 36"
Weight : 300 lb
Specification Sheet
DSKHC
KHCR-B Shelleyglas
Mobile Self-Contained Hot and Cold Combination Counters
- Exterior Top : top is constructed of 14-gauge stainless steel, welded, ground and polished into one integral unit. Top has one to four electrically heated, recessed, die-stamped stainless steel hot food warmers. Each warmer accommodates a 12.75" x 20.75" x 6" (32.4cm x 52.7cm x 15.2cm) deep pan.
- Casters : Units are mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6" (15.2cm).
- Refrigerated Cold Pan : is 7" (17.8cm) deep and constructed of stainless steel. The cold pan is separated from the exterior top by a thermal break. Copper refrigeration tubing is attached to the sides and bottom of the cold pan and is fully insulated with foamed in place polyurethane insulation. Cold pan is equipped with a 1" (2.5cm) I.P.S. drain with a drain valve located at the bottom of the unit. Temperatures of 33°F (1°C) to 41°F (5°C) are maintained with pans recessed 3" (7.6cm) at 86°F ambient room temperature. Pans rest on a stainless steel bracket.
Width : 50"
Depth : 30"
Height : 36"
Weight : 475 lb
Specification Sheet
DSKHCRB
KRB Shelleyglas
Mobile Carving Counters
- Exterior Top : Top is constructed of 14-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners.
- Casters : Units are mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6" (15.2cm).
- Carving Tray : unit has a removable, stainless steel, perforated carving tray, pan and meat holder. A 250 watt heat lamp is mounted directly over the carving tray. Underneath the carving area is a stainless steel lining for easy cleaning.
Width : 28"
Depth : 30"
Height : 36"
Weight : 180 lb
Specification Sheet
DSKRB
LT Shelleymatic
Drop-in tray and rack dispensers
- Platform : Dispenser platform carrier shall be 18-gauge stainless steel and shall be removable for cleaning. Each dispenser shall have 2 self-leveling mechanisms.
- Self-Leveling : Self-leveling mechanisms shall be field adjustable by adding or removing stainless steel extension springs located inside the elevator housing
Width : 153/4"
Depth : 221/8"
Height : 271/2"
Weight : 431 lb
Specification Sheet
dslt
MF Shelleymatic
Built-in remote milk or beverage dispensers
- Inner Liner : Inner liner shall be water tight and constructed of 22-gauge stainless steel with a 1.00" (2.54cm) I.P.S. drain. Opening(s) shall have throat liners constructed of high impact plastic. Unit to be insulated with foamed-in-place polyurethane insulation with a non-conductive breaker strip.
- Lid : Each opening shall have an insulated, stainless steel folding lid with aluminum liner, molded rubber edge and black plastic handles.
- Self Leveling : Each self-leveling mechanism shall be field adjustable by adding or removing stainless steel extension springs in the elevator housing inside the unit. The elevators shall be connected by removable platform carriers constructed of 18-gauge stainless steel.
Width : 291/4"
Depth : 261/4"
Height : 28"
Weight : 240 lb
Specification Sheet
DSMF
MFSC Shelleymatic
Built-in self contained milk or beverage dispensers
- Inner Liner : Inner liner shall be water tight and constructed of 22-gauge stainless steel with a 1.25" (3.2cm) I.P.S. drain. Opening(s) shall have throat liners constructed of high impact plastic. Unit to be insulated with foamed-in-place polyurethane insulation with a nonconductive breaker strip.
- Lid : Each opening shall have an insulated, stainless steel folding lid with high impact plastic liner, molded rubber edge and black plastic handles.
- Louvre : (1) stainless steel louver shall be provided for installation in the cabinet to allow proper airflow to the condensing unit. Each self-leveling mechanism shall be field adjustable by adding or removing stainless steel extension springs in the elevator housing inside the unit. The elevators shall be connected by removable platform carriers constructed of 18-gauge stainless steel.
Width : 431/4"
Depth : 2611/16"
Height : 281/4"
Weight : 303 lb
Specification Sheet
DSMFSC
N Shelleymatic
Free-Standing Self-Contained Milk or Beverage Dispensers
- Inner Liner : Inner liner shall be water-tight and constructed of 22-gauge stainless steel with 1.25" (3.2cm) I.P.S. drain. Unit shall be insulated with high-density, foamed in place polyurethane insulation with a non-conductive to breaker strip.
- Lid : Each opening shall have a stainless steel sliding lid with recessed handles.
- Louvers : 3) stainless steel louvers shall be installed in the end and sides of the cabinet to allow proper air flow to the condensing unit.
Width : 29"
Depth : 28"
Height : 37"
Weight : 327 lb
Specification Sheet
DSN
N225, N227
Self-Contained Drop-In Freezer
- N225 Top : Top of 18-gauge stainless steel, has 1.31" (3.3 cm) overhang front to back and 1.25" (3.18cm) right to left, one die-stamped 10.44" (26.5 cm) x 20.69" (52.5 cm) opening with raised edges. Opening is fitted with insulated, folding, lift-off cover.
- N225 Condensing Unit : Condensing unit mounted below freezer compartment on 16-gauge steel frame, has 1/4 H.P. rating.
- N225 Louver : A stainless steel louver, 13" (33 cm) x 25" (63.5 cm), is supplied for field installation. The cutout size for the louver is 11.50 (29.2 cm) x 23" (58.4 cm).
Width : 2713/16"
Depth : 169/16"
Height : 2613/16"
Weight : 115 lb
Specification Sheet
DS225_227
N6, N10, N14 Shelleymatic
Free-Standing Self-Contained Milk Or Beverage Dispensers
- Compartment : Refrigerated compartment is equipped with drain plumbed to a drain valve locaed at the bottom of the counter.
- Sliding Lid : Each opening shall have a stainless steel sliding lid recessed handles.
- Louvers : 3) stainless steel louvers shall be installed in the end and sides of the cabinet to allow proper air flow to the condensing unit.
Width : 36"
Depth : 32"
Height : 37"
Weight : 382 lb
Specification Sheet
DSN6_10_14
N8000
Drop-In Ice Cooled Cold Pans
Width : 26"
Depth : 18"
Height : 103/4"
Weight : 103 lb
Specification Sheet
DSN8000
N8044-R
Drop-In curved ice cooled cold pan
- NSF certified
- Stainless steel holding clips secure pans
- Push-in perimeter gasket
Width : 40"
Depth : 25"
Height : 105/8"
Weight : 100 lb
Specification Sheet
DSN8000R
N8059-R
Drop-In curved ice cooled cold pan
- NSF certified
- Stainless steel holding clips secure pans
- Push-in perimeter gasket
Width : 5715/16"
Depth : 25"
Height : 105/8"
Weight : 118 lb
Specification Sheet
DSN8000R
N8076-R
Drop-In curved ice cooled cold pan
- NSF certified
- Stainless steel holding clips secure pans
- Push-in perimeter gasket
Width : 735/8"
Depth : 25"
Height : 105/8"
Weight : 145 lb
Specification Sheet
DSN8000R
N8094-R
Drop-In curved ice cooled cold pan
- NSF certified
- Stainless steel holding clips secure pans
- Push-in perimeter gasket
Width : 89"
Depth : 25"
Height : 105/8"
Weight : 164 lb
Specification Sheet
DSN8000R
N8100B
Drop-In Self Contained Bloomington Style Refrigerated Cold Pans
- Sides : Sides and bottom are wrapped with refrigeration lines and insulated with high-density closed-cell polyurethane. Exterior housing is 22-gauge galvanized steel.
- Condensing Unit : Condensing unit is suspended below the cold pan on a 16-gauge steel frame and uses HFC-134a refrigerant. Temperature control has ON/OFF position to shut down cold pan. Unit has an 8' (2.4m) cord and NEMA 5-15P plug. Two stainless steel louvers are provided for field installation on the front of the cabinet, 4" below top of counter; cutout dimension for each is 12" x 23.5" (30.5cm x 59.7cm). Allow at least 12" between the two louvers to provide air circulation to and from the condensing unit.
Width : 26"
Depth : 18"
Height : 217/8"
Weight : 103 lb
Specification Sheet
DSN8100B
N8100FA
Drop-In Self-Contained Forced Air Refrigerated Cold Pans
- Sides : Sides and bottom are insulated with high-density closed-cell polyurethane. Exterior housing is 24-gauge galvanized steel.
- Refrigeration : Refrigeration system uses HFC-404A refrigerant. Condensing unit is suspended below the cold pan on a 16-gauge steel frame. Temperature control has an OFF position to shut down the cold pan. Unit is supplied with expansion valve. Evaporator coil cools pans by air flowing over and under pans. A stainless steel louver is provided for field installation; cutout dimension is 11" x 22" (27.94cm x 55.88cm). A second opening at the rear of the cabinet should be provided at installation to allow for proper air circulation.
- Air Curtain : Air Curtain assembly is removable without the use of tools.
Width : 311/4"
Depth : 269/16"
Height : 289/16"
Weight : 165 lb
Specification Sheet
DS8100FA
N8100NB
Narrow Drop-In Self Contained Bloomington Style Refrigerated Cold Pans
- Sides : Sides and bottom are wrapped with refrigeration lines and insulated with high-density closed-cell polyurethane. Exterior housing is 22-gauge galvanized steel.
- Condensing Unit : Condensing unit is suspended below the cold pan on a 16-gauge steel frame and uses HFC-134a refrigerant. Temperature control has ON/OFF position to shut down cold pan. Unit has an 8' (2.4m) cord and NEMA 5-15P plug. Two stainless steel louvers are provided for field installation on the front of the cabinet, 4" below top of counter; cutout dimension for each is 12" x 23.5" (30.5cm x 59.7cm). Allow at least 12" between the two louvers to provide air circulation to and from the condensing unit.
Width : 463/4"
Depth : 14"
Height : 217/8"
Weight : 175 lb
Specification Sheet
DSN8100NB
N8144-BR
Drop-In curved mechanically cooled cold pan
- NSF certified
- Stainless steel holding clips secure pans
- Push-in perimeter gasket
Width : 40"
Depth : 25"
Height : 21"
Weight : 161 lb
Specification Sheet
DSN8100BR
N8159-BR
Drop-In curved mechanically cooled cold pan
- NSF certified
- Stainless steel holding clips secure pans
- Push-in perimeter gasket
Width : 5715/16"
Depth : 25"
Height : 21"
Weight : 184 lb
Specification Sheet
DSN8100BR
N8176-BR
Drop-In curved mechanically cooled cold pan
- NSF certified
- Stainless steel holding clips secure pans
- Push-in perimeter gasket
Width : 735/8"
Depth : 25"
Height : 21"
Weight : 233 lb
Specification Sheet
DSN8100BR
N8194-BR
Drop-In curved mechanically cooled cold pan
- NSF certified
- Stainless steel holding clips secure pans
- Push-in perimeter gasket
Width : 89"
Depth : 25"
Height : 21"
Weight : 243 lb
Specification Sheet
DSN8100BR
N8200 & N8200G
N8200 & N8200G- Drop-In Self-Contained Frost Top & Granite Frost Top
- Condensing Unit : Condensing unit is suspended below the frost top on a 16-gauge steel frame. Condensing unit uses HFC-404a refrigerant. Unit has an ON/OFF toggle switch, an 8' (2.4m) cord and NEMA 5-15 plug. Unit has (1) stainless steel louver provided for field installation; cutout dimensions are 12" x 23.5" (30.5cm x 59.7cm). A second opening at the rear of the cabinet is provided at installation to allow for proper air circulation.
Width : 313/4"
Depth : 257/8"
Height : 153/4"
Weight : 330 lb
Specification Sheet
DSN8200
N8600
Drop-In Self-Contained Electric Hot & Cold Pans
- Condensing Unit : Condensing unit is suspended below the frost top on a 16-gauge steel frame. Condensing unit uses HFC-404a refrigerant. Unit has an ON/OFF toggle switch, an 8' (2.4m) cord and NEMA 5-15 plug. Unit has (1) stainless steel louver provided for field installation; cutout dimensions are 12" x 23.5" (30.5cm x 59.7cm). A second opening at the rear of the cabinet is provided at installation to allow for proper air circulation.
Width : 313/4"
Depth : 257/8"
Height : 153/4"
Weight : 170 lb
Specification Sheet
DSN8600
N8700
Drop-In Individually-Controled Electric Food wells
Width : -
Depth : 25"
Height : 91/8"
Weight : 103 lb
Specification Sheet
DS8700
N8744-R
Drop-In Curved Individually Controled Electric Hot Food Wells
- Top is constructed of 18-gauge stainless steel
- Flush mounted die stamped drawn 12"x20" individual 20-gauge wells
- Wells depressed slightly into the top to hold in condensation
Width : 40"
Depth : 25"
Height : 9"
Weight : 99 lb
Specification Sheet
DSN8700R
N8759-R
Drop-In Curved Individually Controled Electric Hot Food Wells
- Top is constructed of 18-gauge stainless steel
- Flush mounted die stamped drawn 12"x20" individual 20-gauge wells
- Wells depressed slightly into the top to hold in condensation
Width : 5715/16"
Depth : 25"
Height : 9"
Weight : 134 lb
Specification Sheet
DSN8700R
N8776-R
Drop-In Curved Individually Controled Electric Hot Food Wells
- Top is constructed of 18-gauge stainless steel
- Flush mounted die stamped drawn 12"x20" individual 20-gauge wells
- Wells depressed slightly into the top to hold in condensation
Width : 735/8"
Depth : 25"
Height : 9"
Weight : 166 lb
Specification Sheet
DSN8700R
N8794-R
Drop-In Curved Individually Controled Electric Hot Food Wells
- Top is constructed of 18-gauge stainless steel
- Flush mounted die stamped drawn 12"x20" individual 20-gauge wells
- Wells depressed slightly into the top to hold in condensation
Width : 89"
Depth : 25"
Height : 9"
Weight : 186 lb
Specification Sheet
DSN8700R
N8800 Series
Drop-In single tank electric hot food wells
- Adapter bars to accommodate 12"x20" pans
- Single wet only well 8" deep made of stainless steel kinked to stainless 1" drain
- Single thermostatic temperature control wired to (1) main control panel with 2' of conduit and wire. Field install control panel at location.
Width : 313/4"
Depth : 11"
Height : 26"
Weight : 100 lb
Specification Sheet
DS8800
ND Shelleymatic
Drop-In Napkin Dispenser
Width : -
Depth : -
Height : 24"
Weight : 12 lb
Specification Sheet
DSND
NDF Shelleymatic
Mobile Drop-Front Self-Contained Milk or Beverage Dispensers
- Handles : Opening shall have stainless steel lift-up and fold-down lids with black plastic recessed handles. Door lock is standard.
- Louvers : Ends of the upperstructure shall have die-stamped louvers to allow proper air flow to the condensing unit.
- Refrigeration System : Refrigeration system shall use HFC-134a refrigerant. Refrigerant flow shall be controlled by an expansion valve. Cabinet shall maintain 36°F to 40°F (2°C to 4°C) temperature with lids closed for storage.
Width : 34"
Depth : 3513/16"
Height : 57"
Weight : 365 lb
Specification Sheet
DSNDF
NLFAC Shelleymatic
Self contained milk coolers with air curtain
- Interior : shall be 22 gauge stainless steel. Cabinet shall be fully insulated with 2" (5.1cm) of high-density foamed-in-place polyurethane. Milk crates shall be self-locating in the interior with the use of divider assemblies. Divider assemblies shall be 16-gauge stainless steel. Unit shall have (2) 20-gauge stainless steel louvers, which shall be centered left to right on the front and rear of the equipment. A 0.75" (1.9cm) diameter valve shall be located at the bottom of the equipment, centered left to right, 4.75" (12.1cm) from the rear wall.
- Refrigeration System : shall use HFC-134a refrigerant. Refrigerant flow shall be controlled by an expansion valve. Cabinet shall maintain 36°F to 40°F (2°C to 4°C) interior cabinet temperature at 100°F (38°C) ambient room temperature with lids closed for storage. Properly chilled food product shall maintain 40°F (4°C) for up to 2 hours when lids are open.
- Electrical Connections : shall be 115 volt, 60 Hertz, single phase. Unit shall have an 8ÂÂÂ (2.4cm) long electrical cord and NEMA 5-15 P plug installed at the rear, 14" (30.5cm) from the left end, 6" (15.2cm) above floor.
Width : 40"
Depth : 32"
Height : 42"
Weight : 401 lb
Specification Sheet
DSNLFAC
NSCF Shelleymatic
Free-Standing Self-Contained Milk & Ice Cream Dispenser
- Interior : Interior shall have (2) separate compartments, one refrigerated and one freezer. Inner liners shall be water-tight and constructed of 22-gauge stainless steel with a 1.25" (3.2cm) I.P.S. drain. Unit shall be insulated with high-density, foamed-inplace polyurethane insulation with a non-conductive top breaker strip.
- Lid : Each opening shall have an insulated, stainless steel folding lid with high impact plastic liner, molded rubber edge and black plastic handles.
- Lovers : (3) stainless steel louvers shall be installed in the end and sides of the cabinet to allow proper air flow to the condensing unit.
Width : 48"
Depth : 28"
Height : 37"
Weight : 390 lb
Specification Sheet
DSNSCF
SALD-1, SALD-2 Shelleymatic
Salad and Vegetable Drier
- Inner Lid : is constructed of 18-gauge stainless steel.
- Outer Lid : is a one-piece durable polyethylene plastic with 3/8" (.95cm) diameter holes for proper water disbursement.
- Motor : Unit has a completely enclosed, water-tight motor mounted underneath the unit. Electrical box for capacitor and timer control is mounted on the bottom of the unit. Six foot cord and 5-15 NEMA plug are supplied.
Width : 27"
Depth : 27"
Height : 321/2"
Weight : 85 lb
Specification Sheet
DSSALD
SB Shelleymatic
Drop-In Bread Dispenser
Width : 65/8"
Depth : 65/8"
Height : 28"
Weight : 15 lb
Specification Sheet
DSSB
SC, SC-NU Shelleysteel
Mobile All Purpose Counters
- Casters : Unit is mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6.00" (15.2cm).
- Exterior Top : is constructed of 14-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners.
Width : 28"
Depth : 30"
Height : 36"
Weight : 165 lb
Specification Sheet
SSSC
SCF Shelleymatic
Free-Standing Self-Contained Ice Cream Dispenser
- Lid : Each opening shall have an insulated, stainless steel folding lid with high impact plastic liner, molded rubber edge and black plastic handles.
- Louvers : (3) stainless steel louvers shall be installed in the end and sides of the cabinet to allow proper air flow to the condensing unit.
- Self Leveling : Each self-leveling mechanism shall be field adjustable by adding or removing stainless steel extension springs in the elevator housing inside the unit. The elevators shall be connected by removable platform carriers constructed of 18-gauge stainless steel.
Width : 321/2"
Depth : 28"
Height : 37"
Weight : 334 lb
Specification Sheet
DSSMSCF
SCF ShelleySteel
Mobile Ice Cream Counters
- 18-gauge stainless steel exterior body
- 14-gauge galvanized bottom
- 14-gauge stainless steel top
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSSCF
SCFM Shelleysteel
Mobile Milk and Ice Cream Counters
- Casters : Unit is mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6.00" (15.2cm).
- Exterior Top : is constructed of 14-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners. Top has die-stamped openings and is provided with hinged removable lids. Lids are constructed of stainless steel and have a rubber gasket seal.
- Refrigerated and Freezer Compartments : unit has one refrigerated and one freezer compartment each. Compartments have water-tight inner liner constructed of 22-gauge stainless steel, with radius corners and 1.5" (3.8cm) of polyurethane insulation. Both compartments are equipped with a drain plumbed to a drain valve located in the bottom of the unit. Refrigerated and freezer compartments are equipped with automatic self leveling, field adjustable elevators. Divider trays are supplied.
Width : 50"
Depth : 30"
Height : 36"
Weight : 500 lb
Specification Sheet
DSSCFM
SCFT-NU Shelleysteel
Mobile Self-Contained Frost Top Serving Counter
- Casters : Unit is mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6.00" (15.2cm).
- Exterior Top : is constructed of 14-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners.
- Refrigeration System : uses HCFC-404a refrigerant and has a self-contained 115 volt, 60 Hertz, single phase hermetically sealed condensing unit with adjustable frost top temperature control. Unit is wired with a 3-wire, grounded, maximum 10' (3m) cord and plug. Unit has an on/off switch mounted on the exterior.
Width : 36"
Depth : 30"
Height : 36"
Weight : 380 lb
Specification Sheet
DSSCFTNU
SCI, SCI-NU Shelleyglas
Mobile Ice Pan Serving Counters
- Exterior Top : is constructed of 14-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners.
- Casters : Units are mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6" (15.2cm).
- Insulated Ice Pan : is 7" (17.8cm) deep and constructed of 22-gauge stainless steel. A removable, perforated false bottom 1" (2.5cm) high, constructed of stainless steel, is supplied. The ice pan is separated from the exterior top by a Therma Brake and fully insulated with foam in place polyurethane insulation. Ice pan is equipped with a (1" (2.5cm) I.P.S. drain plumbed to drain valve located at the bottom of the unit.
Width : 36"
Depth : 30"
Height : 36"
Weight : 200 lb
Specification Sheet
SSSCI
SCM Shelleysteel
Mobile Milk Counters
- Exterior Top : is constructed of 14-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners. Top has one (SCM-36), two (SCM-50), three (SCM-60) or four (SCM-74) die-stamped openings and is provided with hinged removable lids. Lids are constructed of stainless steel and have a rubber gasket seal.
- Casters : Units are mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6" (15.2cm).
- Refrigerated Compartment : have water-tight inner liner constructed of 22-gauge stainless steel, with radius corners and 1.5" (3.8cm) of polyurethane insulation. Compartment is equipped with a drain plumbed to a drain valve located in the bottom of the unit. Refrigerated compartment is equipped with automatic self leveling, field adjustable elevators. Divider trays are supplied.
Width : 36"
Depth : 30"
Height : 36"
Weight : 400 lb
Specification Sheet
DSSCM
SCN-48 Shelleysteel
Trimline All purpose counter
- 20-gauge stainless steel exterior body
- Reinforced internally
- 14-gauge stainless steel top
Width : 48"
Depth : 201/4"
Height : 36"
Weight : 165 lb
Specification Sheet
DSSCN
SCN-68 Shelleysteel
Trimline All purpose counter
- 20-gauge stainless steel exterior body
- Reinforced internally
- 14-gauge stainless steel top
Width : 68"
Depth : 201/4"
Height : 36"
Weight : 175 lb
Specification Sheet
DSSCN
SCS Shelleysteel
Mobile Cashier's Counter
- Exterior Top : is constructed of 14-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners. A 2" (5.1cm) ferruled hole is located at the rear of the top to allow cord access for cash registers
- Casters : Units are mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6" (15.2cm).
- Interior Lining : at the cashier's end is 18-gauge stainless steel, with a stainless steel bottom shelf. Unit has an 16.5" x 16.5" x 5" (42cm x 42cm x 12.7cm) stainless steel cash drawer with lock and key.
Width : 30"
Depth : 30"
Height : 36"
Weight : 180 lb
Specification Sheet
SSSCS
SCSC-B Shelleysteel
Mobile Self-Contained Cold Pan Serving Counters
- Exterior Top : is constructed of 14-gauge stainless steel, welded, ground and polished into one integral unit.
- Casters : Units are mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6" (15.2cm).
- Refrigerated Cold Pan : is 7" (17.8cm) deep and constructed of stainless steel. The cold pan is separated from the exterior top by a thermal break. Copper refrigeration tubing is attached to the sides and bottom of the cold pan and is fully insulated with foamed in place polyurethane insulation. Cold pan is equipped with a 1" (2.5cm) I.P.S. drain with drain valve located at the bottom of the unit. Temperatures of 33°F (1°C) to 41°F (5°C) are maintained with pans recessed 3" (7.6cm) at 86°F ambient room temperature. Pans rest on a stainless steel bracket.
Width : 36"
Depth : 30"
Height : 36"
Weight : 350 lb
Specification Sheet
DSSCSCB
SCSC-EF Shelleysteel
Mobile Self-Contained LiquiTec Cold Pan Serving Counters
- Casters : Unit is mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6.00" (15.2cm).
- Exterior Top : is constructed of 14-gauge stainless steel, welded, ground and polished into one integral unit.
- LiquiTec Cold Pan : has 2-6 die stamped 19.87" x 11.87" (50.5cm x 30.2cm) openings with depressed edges. Formed well below each opening is 6.25" (15.9cm) deep with .5" drain mainfold to gate valve. Each well, flush with the top, for flush mount pans to accommodate 12" x 20" (30.5cm x 50.8cm) pans 4" (7.6cm) or 6" (15.2cm) deep, supplied by others. Product temperatures of 33°F (1°C) to 41°F (5°C) are maintained at 86°F (30°C) ambient room temperature, meeting NSF7 requirements. The cold pan is separated from the exterior top by a thermal break. Copper refrigeration tubing is attached to the sides of every well. Eutectic fluid is used as the heat transfer medium. Cold pan is fully insulated with foamed in place polyurethane insulation.
Width : 36"
Depth : 30"
Height : 36"
Weight : 350 lb
Specification Sheet
SSEF
SC-TRI Shelleysteel
Triangle Corner Unit
- Exterior Top : shall be one piece, 14-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners with fully hemmed nosing on all sides. Stainless steel fully retractable interlocks are installed on opposing corners and locks units into a complete serving system.
- Casters : Units are mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6" (15.2cm).
- Body Interior : Open understorage to be lined with 18-gauge stainless steel. Open shelf is totally enclosed on all sides and can be accessed without removing the top.
Width : 399/16"
Depth : 30"
Height : 36"
Weight : 160 lb
Specification Sheet
SSSCTRI
SCTS Shelleysteel
Mobile Tray and Silver Stands
- Casters : Unit is mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6.00" (15.2cm).
- Exterior Top : is constructed of 14-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners. Top has area for silverware with stepdown for trays.
Width : 30"
Depth : 28"
Height : 36"
Weight : 150 lb
Specification Sheet
SSSCTS
SCU, SCU-NU Shelleysteel
Mobile Beverage Counters
- Casters : Unit is mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6.00" (15.2cm).
- Exterior Top : is constructed of 14-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners. Top is reinforced and includes a stainless steel drain trough with a removable stainless steel anti-splash drip gate. Drain trough has a 1" (2.5cm) I.P.S. drain plumbed to a drain valve located at the right bottom of the unit. Drain trough is located on the customer's side of counter top.
Width : 36"
Depth : 301/4"
Height : 36"
Weight : 200 lb
Specification Sheet
SSSCU
SE, SES Shelleybasic
Mobile Corner Units
- Top : Constructed of 16-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners.
- Casters : Units are mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6" (15.2cm).
Width : 29"
Depth : 29"
Height : 36"
Weight : 110 lb
SE-C, SES-C Shelleybasic
Mobile Self-Contained Cold Pan Serving Counters
- Top : Constructed of 16-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners.
- Refrigeration : Cold pan is 9" (22.9cm) deep and constructed of stainless steel. The cold pan is separated from the exterior top by a thermal break. Copper refrigeration tubing is attached to the sides of the cold pan and is fully insulated with foamed in place polyurethane insulation. Cold pan is equipped with a drain, gate valve and garden hose hookup. Temperatures of 33°F (1C) to 41°F (5C) are maintained with pans recessed 2" (5cm) at 86°F ambient room temperature. Pans rest on a stainless steel ledge.
- Casters : Units are mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6" (15.2cm).
Width : 50"
Depth : 29"
Height : 36"
Weight : 340 lb
Specification Sheet
DSSEC
SE-CS, SES-CS Shelleybasic
Mobile Cashiers Counters
- Top : Constructed of 16-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners.
- Casters : Units are mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6" (15.2cm).
Width : 29"
Depth : 30"
Height : 36"
Weight : 170 lb
Specification Sheet
DSCS
SE-F, SES-F Shelleybasic
Mobile Self-Contained Frost Top Serving Counters
- Exterior Top : Constructed of 16-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners.
- Exterior Body : Open frame construction with 16-gauge stainless steel corners: 18-gauge stainless steel full bottom shelf and stainless steel C channel front and sides for optional accent panels.
- Casters : Units are mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6" (15.2cm).
Width : 50"
Depth : 29"
Height : 36"
Weight : 370 lb
SE-H, SES-H Shelleybasic
Mobile Heated Serving Counters
- Top : Constructed of 16-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners.
- Heated Food Warmers : Constructed of die-stamped stainless steel. Heated food warmers are insulated on bottom. Each heated food warmer is individually equipped with a heated element rated at 1000 watts for 120 volt or 208/230 volt, 60 hertz, single phase service and wired to an adjustable control switch and indicator light in the control panel. Heated food warmers are interwired to a maximum 10' (3m) long cord with a grounded plug for 120 volt or 208/230 volt, 60 hertz, single phase electrical service. Unit is equipped with a drain, manifold and gate valve with garden hose hookup.
- Casters : Units are mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6" (15.2cm).
Width : 50"
Depth : 29"
Height : 36"
Weight : 215 lb
Specification Sheet
DSSEH
SE-HC, SES-HC Shelleybasic
Hot/Cold Combination Serving Counters
- Top : Constructed of 16-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners.
- Well : Well is 8" deep and creased to a 1" diameter drain.
- Casters : Units are mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6" (15.2cm).
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSHC
SE-I, SES-I Shelleybasic
Mobile Ice Pan Serving Counters
- Top : Constructed of 16-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners.
- Insulated Ice Pan : Ice pan is 9" (22.9cm) deep and constructed of 24-gauge stainless steel. A removable, perforated false bottom 1" (2.5cm) high, constructed of stainless steel, is supplied. The ice pan is separated from the exterior top by a thermal brake and fully insulated with foam in place polyurethane insulation. Ice pan is equipped with a 1' (2.5cm) I.P.S. drain plumbed to drain valve located at the bottom of the unit. Unit is equipped with a drain, gate valve and garden hose hookup.
- Casters : Units are mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6" (15.2cm).
Width : 50"
Depth : 29"
Height : 36"
Weight : 200 lb
SE-ICE, SES-ICE Shelleybasic
Mobile Ice Cream Counters
- Top : Constructed of 16-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners.
- Freezer Compartment : A water-tight inner liner constructed of 22-gauge stainless steel, with radius corners and 1.5" (3.8cm) of polyurethane insulation.
- Casters : Units are mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6" (15.2cm).
Width : 50"
Depth : 29"
Height : 36"
Weight : 460 lb
SE-TS, SES-TS Shelleybasic
Mobile Tray Stands
- Top : Constructed of 16-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners.
- Casters : Units are mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6" (15.2cm).
Width : 29"
Depth : 30"
Height : 36"
Weight : 140 lb
SE-U, SES-U Shelleybasic
Mobile All Purpose Counters
- Top : Constructed of 16-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners.
- Casters : Units are mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6" (15.2cm).
Width : 50"
Depth : 29"
Height : 36"
Weight : 150 lb
SH, SH-NU Shelleysteel
Mobile Heated Serving Counters
- Casters : Unit is mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6.00" (15.2cm).
- Exterior Top : is constructed of 14-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners. Top has two to six electrically heated, recessed, die-stamped stainless steel hot food warmers. Each warmer accommodates one 12.75" x 20.75" x 6" (32.4cm x 52.7cm x 15.2cm) pan.
- Heated Food Warmers : are constructed of die-stamped stainless steel. Heated food warmers are insulated on bottom. Each heated food warmer is individually equipped with a heated element rated at 1000 watts for 120 volt or 208/230 volt, 60 hertz, single phase service and wired to an adjustable control switch and indicator light in the control panel. Heated food warmers are interwired to a maximum 10' (3m) long cord with a grounded plug for 120 volt or 208/230 volt, 60 hertz, single phase electrical service.
Width : 36"
Depth : 301/4"
Height : 36"
Weight : 380 lb
Specification Sheet
DSSH
SHC-NU Shelleysteel
Mobile Hot and Cold Combination Counters
- Exterior Top : is constructed of 14-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners. Top has two to four electrically heated, recessed, die-stamped stainless steel hot food warmers. Each warmer accommodates one 12.75" x 20.75" x 6" (32.4cm x 52.7cm x 15.2cm) pan.
- Casters : Units are mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6" (15.2cm).
- Heated Food Warmers : are constructed of die-stamped stainless steel. Each heated food warmer is individually equipped with a heated element rated at 1000 watts for 120 volt or 208/230 volt, 60 hertz, single phase service and wired to an adjustable control switch and indicator light in the control panel. Heated food warmers are interwired to a 3-wire, grounded minimum 10ÂÂÂ’ (3m) long cord with a grounded plug for 120 volt or 208/230 volt, 60 hertz, single phase electrical service. Unit has an on/off switch mounted on the exterior.
Width : 50"
Depth : 30"
Height : 36"
Weight : 136 lb
Specification Sheet
DSSHC
SHCR-B Shelleysteel
Mobile Self-Contained Cold Pan Serving Counters
- Exterior Top : is constructed of 14-gauge stainless steel, welded, ground and polished into one integral unit. Top has one to four electrically heated, recessed, die-stamped stainless steel hot food warmers. Each warmer accommodates a 12.75" x 20.75" x 6" (32.4cm x 52.7cm x 15.2cm) deep pan.
- Casters : Units are mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6" (15.2cm).
- Heated Food Warmers : are constructed of die-stamped stainless steel. Each heated food warmer is individually equipped with a heating element rated at 1000 watts for 120 volt or 208/230 volt, 60 Hertz, single phase service and wired to an adjustable control switch and indicator light in the control panel. Heated food warmers are interwired to a maximum 10ÂÂ (3m) long cord with grounded plug for 115 volt or 208/230 volt, 60 Hertz, single phase electrical service.
Width : 50"
Depth : 30"
Height : 36"
Weight : 475 lb
Specification Sheet
DSSHCRB
SLT4 Shelleysteel
TrimLine L-Shaped Heated Tray Make-Up Serving Counters
- Exterior Top : is constructed of 16-gauge stainless steel welded, ground and polished into one integral unit. Top has square exterior corners.
- Control Panel : is die-stamped stainless steel and is installed on the exterior at the inner corner of the ÂL".
- Top : has (4) electrically heated, recessed, die stamped stainless steel hot food warmers. Food warmers are fully insulated on all sides and bottom with (1" (2.54cm) of fiberglass matting and each is covered with a galvanized steel jacket. Each food warmer has (1) heating element, rated at 1000 watts for 208 volt electrical service and wired to an individually adjustable temperature control indicator light in the control panel. Food warmers are wired together to an ON/OFF switch in the control panel. Each food warmer accommodates (1) 12.75" x 20.75" x 6" deep pan (32.4cm x 52.7cm x 15.2). Pans are provided by others. NOTE: Drains are optional.
Width : 685/8"
Depth : 301/4"
Height : 36"
Weight : 300 lb
Specification Sheet
SSSLT4
SPCS, SPCS-E Shelleyspeed
Cashier Counter, 30" depth
- Top : 14-gauge stainless steel top standard
- Size : 34" counter height, 30" depth
- Hole : A 2" ferruled hole is located at the rear of the top to allow cord access for cash register
Width : 30"
Depth : 30"
Height : 34"
Weight : 165 lb
Specification Sheet
DSSPCS
SPCSW, SPCS-EW Shelleyspeed
Cashier Counter, 35" depth
- Top : 14-gauge stainless steel top standard
- Size : 34" counter height, 35" depth
- Hole : A 2" ferruled hole is located at the rear of the top to allow cord access for cash register
Width : 30"
Depth : 35"
Height : 34"
Weight : 165 lb
Specification Sheet
DSSPCSW
SPF Shelleyspeed
Freezer Module, 34" height, 30" depth
- Top : 14-gauge stainless steel top standard
- Size : 34" counter height, 35" depth
- Cord : 9' long cord and plug are supplied standard
Width : 42"
Depth : 30"
Height : 34"
Weight : 370 lb
Specification Sheet
SPF
SPF-E Shelleyspeed
Freezer Module, 30" height, 30" depth
- Top : 14-gauge stainless steel top standard
- Size : 30" counter height, 30" depth
- Cord : 9' long cord and plug are supplied standard
Width : 42"
Depth : 30"
Height : 30"
Weight : 370 lb
Specification Sheet
SPF-E
SPF-EW Shelleyspeed
Freezer Module, 34" height, 35" depth
- Top : 14-gauge stainless steel top standard
- Size : 34" counter height, 35" depth
- Electrical : Electrical: 120 volt, 60 cycle, single phase
Width : 42"
Depth : 30"
Height : 34"
Weight : -
SPF-W Shelleyspeed
Freezer Module, 34" height, 35" depth
- Top : 14-gauge stainless steel top standard
- Size : 34" counter height, 35" depth
- Electrical : Electrical: 120 volt, 60 cycle, single phase
Width : 42"
Depth : 30"
Height : 34"
Weight : -
SPH Shelleyspeed
Heated Module, 34" height, 30" depth
- Top : 14-gauge stainless steel top standard
- Size : 34" counter height, 30" depth
- Seperate Systems : Two separate systems, one section refrigerator and one section freezer
Width : 40"
Depth : 30"
Height : 34"
Weight : 370 lb
SPH-E Shelleyspeed
Heated Module, 30" height, 30" depth
- Top : 14-gauge stainless steel top standard
- Size : 30" counter height, 30" depth
- Seperate Systems : Two separate systems, one section refrigerator and one section freezer
Width : 40"
Depth : 30"
Height : 30"
Weight : 370 lb
SPH-EW Shelleyspeed
Heated Module, 30" height, 35" depth
- Top : 14-gauge stainless steel top standard
- Size : 30" counter height, 35" depth
- Seperate Systems : Two separate systems, one section refrigerator and one section freezer
Width : 40"
Depth : 35"
Height : 30"
Weight : 370 lb
SPHM Shelleyspeed
Heated Merchandising Module, 34" counter height, 30" depth
- Top : 14-gauge stainless steel top standard
- Size : 34" counter height, 30" depth
- Base : Base of unit has dry storage; lid rack or basket rack optional
Width : 50"
Depth : 30"
Height : 61"
Weight : 440 lb
SPHM-E Shelleyspeed
Heated Merchandising Module, 30" counter height, 30" depth
- Top : 14-gauge stainless steel top standard
- Size : 30" counter height, 30" depth
- Base : Base of unit has dry storage; lid rack or basket rack optional
Width : 50"
Depth : 30"
Height : 61"
Weight : 440 lb
SPHM-EW Shelleyspeed
Heated Merchandising Module, 30" counter height, 35" depth
- Top : 14-gauge stainless steel top standard
- Size : 30" counter height, 35" depth
- Dry Storage : Base of unit has dry storage; lid rack or basket rack optional
Width : 50"
Depth : 35"
Height : 6015/16"
Weight : 165 lb
SPHM-W Shelleyspeed
Heated Merchandising Module, 34" counter height, 35" depth
- Top : 14-gauge stainless steel top standard
- Size : 34" counter height, 35" depth
- Dry Storage : Base of unit has dry storage; lid rack or basket rack optional
Width : 50"
Depth : 35"
Height : 6015/16"
Weight : 460 lb
SPH-W Shelleyspeed
Heated Module, 34" height, 35" depth
- Top : 14-gauge stainless steel top standard
- Size : 34" counter height, 35" depth
- Seperate Systems : Two separate systems, one section refrigerator and one section freezer
Width : 40"
Depth : 35"
Height : 34"
Weight : 370 lb
SPM Shelleyspeed
Utility (Merchandising) Module, 34" height, 30" depth
- Top : 14-gauge stainless steel top standard
- Size : 34" counter height, 30" depth
- Dry Compartment : Units have a single or double door dry compartment for storage
Width : 28"
Depth : 30"
Height : 34"
Weight : 165 lb
SPM-E Shelleyspeed
Utility (Merchandising) Module, 30" height, 30" depth
- Top : 14-gauge stainless steel top standard
- Size : 30" counter height, 30" depth
- Dry Compartment : Units have a single or double door dry compartment for storage
Width : 28"
Depth : 30"
Height : 30"
Weight : 165 lb
SPM-E Shelleyspeed
Utility (Merchandising) Module, 30" height, 30" depth
- Top : 14-gauge stainless steel top standard
- Size : 30" counter height, 30" depth
- Dry Compartment : Units have a single or double door dry compartment for storage
Width : 28"
Depth : 30"
Height : 30"
Weight : 165 lb
SPM-W Shelleyspeed
Utility (Merchandising) Module, 34" height, 35" depth
- Top : 14-gauge stainless steel top standard
- Size : 30" counter height, 35" depth
- Dry Compartment : Units have a single or double door dry compartment for storage
Width : 28"
Depth : 35"
Height : 34"
Weight : 165 lb
SPR Shelleyspeed
Refrigerator Module, 34" height, 30" depth
- Top : 14-gauge stainless steel top standard
- Size : 34" counter height, 30" depth
- Cord : 9ÂÂ long cord and plug are supplied standard
Width : 40"
Depth : 30"
Height : 34"
Weight : 370 lb
Specification Sheet
SPR
SPRDP-DEW Shelleyspeed
Refrigerated Display Case, 30" counter height, 35" depth
- Top : 14-gauge stainless steel top standard
- Size : 30" counter height, 35" depth
- Exterior Sides : Display exterior sides are made of 18-gauge stainless steel
Width : 36"
Depth : 30"
Height : 76"
Weight : 576 lb
SPRDP-DW Shelleyspeed
Refrigerated Display Case, 34" counter height, 35" depth
- Top : 14-gauge stainless steel top standard
- Size : 34" counter height, 35" depth
- Exterior Sides : Display exterior sides are made of 18-gauge stainless steel
Width : 36"
Depth : 30"
Height : 76"
Weight : 579 lb
SPRDP-N Shelleyspeed
Refrigerated Display Case, 34" counter height, 30" depth
- Top : 14-gauge stainless steel top standard
- Size : 34" counter height, 30" depth
- Exterior Sides : Display exterior sides are made of 18-gauge stainless steel
Width : 36"
Depth : 30"
Height : 76"
Weight : 517 lb
Specification Sheet
DSSSSPRDPN
SPRDP-NE Shelleyspeed
Refrigerated Display Case, 30" counter height, 30" depth
- Top : 14-gauge stainless steel top standard
- Size : 30" counter height, 30" depth
- Exterior Sides : Display exterior sides are made of 18-gauge stainless steel
Width : 36"
Depth : 30"
Height : 76"
Weight : 517 lb
SPR-E Shelleyspeed
Refrigerator Module, 30" height, 30" depth
- Top : 14-gauge stainless steel top standard
- Size : 30" counter height, 30" depth
- Seperate Systems : Two separate systems, one section refrigerator and one section freezer
Width : 40"
Depth : 30"
Height : 30"
Weight : 370 lb
Specification Sheet
SPR-E
SPR-EW Shelleyspeed
Refrigerator Module, 30" height, 35" depth
- Top : 14-gauge stainless steel top standard
- Size : 30" counter height, 35" depth
- Electrical : Electrical: 120 volt, 60 cycle, single phase
Width : 40"
Depth : 35"
Height : 30"
Weight : 370 lb
Specification Sheet
SPR-EW
SPRF Shelleyspeed
Refrigerator/Freezer Combination Module, 34" height, 30" depth
- Top : 14-gauge stainless steel top standard
- Size : 34" counter height, 30" depth
- Seperate Systems : Two separate systems, one section refrigerator and one section freezer
Width : 68"
Depth : 30"
Height : 34"
Weight : 550 lb
SPRF-E Shelleyspeed
Refrigerator/Freezer Combination Module, 30" height, 30" depth
- Top : 14-gauge stainless steel top standard
- Size : 30" counter height, 30" depth
- Seperate Systems : Two separate systems, one section refrigerator and one section freezer
Width : 68"
Depth : 30"
Height : 30"
Weight : 550 lb
SPRF-EW Shelleyspeed
Refrigerator/Freezer Combination Module, 30" height, 35" depth
- Top : 14-gauge stainless steel top standard
- Size : 30" counter height, 35" depth
- Seperate Systems : Two separate systems, one section refrigerator and one section freezer
Width : 68"
Depth : 35"
Height : 30"
Weight : 550 lb
SPRF-W Shelleyspeed
Refrigerator/Freezer Combination Module, 34" height, 35" depth
- Top : 14-gauge stainless steel top standard
- Size : 34" counter height, 35" depth
- Seperate Systems : Two separate systems, one section refrigerator and one section freezer
Width : 68"
Depth : 35"
Height : 34"
Weight : 550 lb
SPRH Shelleyspeed
Refrigerator/Heated Combination Module, 34" height, 30" depth
- Top : 14-gauge stainless steel top standard
- Size : 34" counter height, 30" depth
- Seperate Systems : Two separate systems, one heated, one refrigerated
Width : 68"
Depth : 30"
Height : 34"
Weight : 550 lb
SPRH-E Shelleyspeed
Refrigerator/Heated Combination Module, 30" height, 30" depth
- Top : 14-gauge stainless steel top standard
- Size : 30" counter height, 30" depth
- Seperate Systems : Two separate systems, one heated, one refrigerated
Width : 68"
Depth : 30"
Height : 30"
Weight : 550 lb
SPRH-EW Shelleyspeed
Refrigerator/Heated Combination Module, 30" height, 35" depth
- Top : 14-gauge stainless steel top standard
- Size : 30" counter height, 35" depth
- Seperate Systems : Two separate systems, one heated, one refrigerated
Width : 68"
Depth : 35"
Height : 30"
Weight : 550 lb
SPRH-W Shelleyspeed
Refrigerator/Heated Combination Module, 34" height, 35" depth
- Top : 14-gauge stainless steel top standard
- Size : 34" counter height, 35" depth
- Seperate Systems : Two separate systems, one heated, one refrigerated
Width : 68"
Depth : 35"
Height : 34"
Weight : 550 lb
SPR-W Shelleyspeed
Refrigerator Module, 34" height, 35" depth
- Top : 14-gauge stainless steel top standard
- Size : 34" counter height, 35" depth
- Cord : 9Â long cord and plug are supplied standard
Width : 40"
Depth : 35"
Height : 34"
Weight : 370 lb
SRB Shelleysteel
Mobile Carving Counters
- Casters : Unit is mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6.00" (15.2cm).
- Exterior Top : is constructed of 14-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners.
- Carving Tray : unit has a removable, stainless steel, perforated carving tray, pan and meat holder. A 250 watt heat lamp is mounted directly over the carving tray. Underneath the carving area is a stainless steel lining for easy cleaning.
Width : 28"
Depth : 30"
Height : 36"
Weight : 180 lb
Specification Sheet
DSSRB
SSD/SAD/SMDP2-S, SH Specification Line
Self-Contained Solid Door Two-Section Dual Temp Refrigerator/Freezer Pass-Thru
- SS Series : Stainless steel interior and exterior
- SA Series : Stainless steel exterior, aluminum interior
- SM Series : Aluminum interior and exterior, stainless front
Width : 55"
Depth : 361/4"
Height : 811/8"
Weight : 730 lb
Specification Sheet
DSSSDP2
SSD/SAD/SMDRL2-G, GH Specification Line
Self-Contained Glass Door Two-Section Dual Temp Refrigerator/Freezer Reach-ins
- SS Series : Stainless steel interior and exterior
- SA Series : Stainless steel exterior, aluminum interior
- SM Series : Aluminum interior and exterior, stainless front
Width : 56"
Depth : 34"
Height : 811/8"
Weight : 730 lb
Specification Sheet
DSSSD2-G
SSD/SAD/SMDRL2-S, SH Specification Line
Self-Contained Solid Door Two-Section Dual Temp Refrigerator/Freezer Reach-Ins
- SS Series : Stainless steel interior and exterior
- SA Series : Stainless steel exterior, aluminum interior
- SM Series : Aluminum interior and exterior, stainless front
Width : 56"
Depth : 34"
Height : 811/8"
Weight : 730 lb
Specification Sheet
DSSSD2
SSD/SAD/SMDTR1-GH, SSD/SAD/SMDBR1-GH Specification Line
Glass Door Single Section Dual Temp Refrigerator/Freezer Reach Ins
- SS Series : Stainless steel interior and exterior
- SA Series : Stainless steel exterior, aluminum interior
- SM Series : Aluminum interior and exterior, stainless steel front
Width : 29"
Depth : 34"
Height : 8011/16"
Weight : 525 lb
Specification Sheet
DSSSD-G
SSD/SAD/SMDTR1-SH, SSD/SAD/SMDBR1-SH Specification Line
Solid Door Single Section Dual Temp Refrigerator/Freezer Reach Ins
- SS Series : Stainless Steel interior and exterior
- SA Series : Stainless steel exterior, aluminum interior
- SM Series : Aluminum interior and exterior, stainless steel front
Width : 29"
Depth : 34"
Height : 8011/16"
Weight : 525 lb
Specification Sheet
DSSSD1
SSF/SAF/SMF-G, GH Specification Line
Self-Contained Glass Door Reach-In Freezer
- SS Series : Stainless steel interior and exterior
- SA Series : Stainless steel exterior, aluminum interior
- SM Series : Aluminum interior and exterior, stainless front
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSSSF-G
SSF/SAF/SMFN-S, SH Specification Line
Self-Contained Solid Door Narrow Reach-In Freezer
- SS Series : Stainless steel interior and exterior
- SA Series : Stainless steel exterior, aluminum interior
- SM Series : Aluminum interior and exterior, stainless front
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSSSFN
SSF/SAF/SMFRI Specification Line
Self-Contained Solid Door Roll-In Freezer
- SS Series : Stainless steel interior and exterior
- SA Series : Stainless steel exterior, aluminum interior
- SM Series : Aluminum interior and exterior, stainless front
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSSSFRI
SSF/SAF/SMF-S, SH Specification Line
Self-Contained Solid Door Reach-In Freezer
- SS Series : Stainless steel interior and exterior
- SA Series : Stainless steel exterior, aluminum interior
- SM Series : Aluminum interior and exterior, stainless front
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSSSF
SSF/SAF/SMFS-S, SH Specification Line
Self-Contained Solid Door Shallow Reach-In Freezer
- SS Series : Stainless steel interior and exterior
- SA Series : Stainless steel exterior, aluminum interior
- SM Series : Aluminum interior and exterior, stainless front
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSSSFS
SSFPT/SAFPT/SMFPT-S Specification Line
Self-Contained Solid Door Pass-Thru Freezer
- SS Series : Stainless steel interior and exterior
- SA Series : Stainless steel exterior, aluminum interior
- SM Series : Aluminum interior and exterior, stainless front
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSSSFPT
.jpg "SSH/SAH/SMH-G, GH Specification Line")
SSH/SAH/SMH-G, GH Specification Line
Self-Contained Glass Door Heated Reach-In
- SS Series : Stainless steel interior and exterior
- SA Series : Stainless steel exterior, aluminum interior
- SM Series : Aluminum interior and exterior, stainless front
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSSSH-G
SSH/SAH/SMHN-S, SH Specification Line
Self-Contained Solid Door Two-Section Narrow Heated Reach-In
- SS Series : Stainless steel interior and exterior
- SA Series : Stainless steel exterior, aluminum interior
- SM Series : Aluminum interior and exterior, stainless front
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSSSHN
SSH/SAH/SMH-S, SH Specification Line
Self-Contained Solid Door Heated Reach-In
- SS Series : Stainless steel interior and exterior
- SA Series : Stainless steel exterior, aluminum interior
- SM Series : Aluminum interior and exterior, stainless front
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSSSH
SSH2NS/SH, SAH2NS/SH Specification Line
Solid Door Narrow Hot Food Cabinet Reach-In
- Interior : Stainless steel interior and exterior (SS)
- Interior : Stainless steel exterior, aluminum interior (SA)
- Locks : Built in door locks with heavy duty strikes
Width : 48"
Depth : 34"
Height : 80"
Weight : 650 lb
Specification Sheet
DSSSHN
SSHPT/SAHPT/SMHPT-S, SH Specification Line
Self-Contained Solid Door Heated Pass-Thru
- SS Series : Stainless steel interior and exterior
- SA Series : Stainless steel exterior, aluminum interior
- SM Series : Aluminum interior and exterior, stainless front
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSSSHPT
SSHRI/SAHRI/SMHRI Specification Line
Self-Contained Glass Door Heated Roll-In
- SS Series : Stainless steel interior and exterior
- SA Series : Stainless steel exterior, aluminum interior
- SM Series : Aluminum interior and exterior, stainless front
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSSSHRI-G
SSHRI/SAHRI/SMHRI Specification Line
Self-Contained Solid Door Heated Roll-In
- SS Series : Stainless steel interior and exterior
- SA Series : Stainless steel exterior, aluminum interior
- SM Series : Aluminum interior and exterior, stainless front
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSSSHRI
SSHRT/SAHRT/SMHRT Specification Line
Self-Contained Solid Door Heated Roll-Thru
- SS Series : Stainless exterior and interior full door
- SA Series : Stainless exterior and aluminum interior full door
- SM Series : Stainless front aluminum exterior and interior full door
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSSSHRT
SSR/SAR/SMR Specification Line
Self-Contained Solid Door Reach-In Refrigerator
- SS Series : Stainless steel interior and exterior
- SA Series : Stainless steel exterior, aluminum interior
- SM Series : Aluminum interior and exterior, stainless front
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSSSR
SSR/SAR/SMR-G Specification Line Glass Door
Self-Contained Glass Door Reach-In Refrigerator
- SS Series : Stainless steel interior and exterior
- SA Series : Stainless steel exterior, aluminum interior
- SM Series : Aluminum interior and exterior, stainless front
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSSSR-G
SSR2/SAR2/SMR2 Specification Line
Self-Contained Sliding Door Reach-In Refrigerator
- SS Series : Stainless steel interior and exterior
- SA Series : Stainless steel exterior, aluminum interior
- SM Series : Aluminum interior and exterior, stainless front
Width : 56"
Depth : 34"
Height : 811/8"
Weight : 670 lb
Specification Sheet
DSSSR-SL
SSR2S/SAR2/SMR2S Specification Line
Self-Contained Sliding Door Shallow Reach-In Refrigerator
- SS Series : Stainless steel interior and exterior
- SA Series : Stainless steel exterior, aluminum interior
- SM Series : Aluminum interior and exterior, stainless front
Width : 56"
Depth : 26"
Height : 811/8"
Weight : 670 lb
Specification Sheet
DSSSRS-SL
SSRFF Specification Line
Self-Contained Fish Drawer Reach-In
- Stainless steel interior and exterior
- External digital thermometer with high/low temperature alarm
- Easy to use electronic control
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSSSRFF
SSRN/SARN/SMRN Specification Line
Self-Contained Glass Door Narrow Reach-In Refrigerator
- SS Series : Stainless steel interior and exterior
- SA Series : Stainless steel exterior, aluminum interior
- SM Series : Aluminum interior and exterior, stainless front
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSSSRN-G
SSRN/SARN/SMRN Specification Line
Self-Contained Solid Door Narrow Reach-In Refrigerator
- SS Series : Stainless steel interior and exterior
- SA Series : Stainless steel exterior, aluminum interior
- SM Series : Aluminum interior and exterior, stainless front
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSSSRN
SSRPT/SARPT/SMRPT Specification Line
Self-Contained Solid Door Pass-Thru Refrigerator
- SS Series : Stainless steel interior and exterior
- SA Series : Stainless steel exterior, aluminum interior
- SM Series : Aluminum interior and exterior, stainless front
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSSSRPT
SSRPT/SARPT/SMRPT-G, GH Specification Line
Self-Contained Glass Door Pass-Thru Refrigerator
- SS Series : Stainless steel interior and exterior
- SA Series : Stainless steel exterior, aluminum interior
- SM Series : Aluminum interior and exterior, stainless front
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSSSRPT-G
SSRPTS/SARPTS/SMRPTS Specification Line
Self-Contained Shallow Solid Door Pass-Thru Refrigerator
- SS Series : Stainless steel interior and exterior
- SA Series : Stainless steel exterior, aluminum interior
- SM Series : Aluminum interior and exterior, stainless front
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSSSRPTS
SSRRI/SARRI/SMRRI Specification Line
Self-Contained Glass Door Roll-In Refrigeration
- SS Series : Stainless steel interior and exterior
- SA Series : Stainless steel exterior, aluminum interior
- SM Series : Aluminum interior and exterior, stainless front
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSSSRRI-G
SSRRI/SARRI/SMRRI Specification Line
Self-Contained Solid Door Roll-In Refrigeration
- SS Series : Stainless steel interior and exterior
- SA Series : Stainless steel exterior, aluminum interior
- SM Series : Aluminum interior and exterior, stainless front
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSSSRRI
SSRRT/SARRT/SMRRT Specification Line
Self-Contained Solid Door Roll-Thru Refrigeration
- SS Series : Stainless steel interior and exterior
- SA Series : Stainless steel exterior, aluminum interior
- SM Series : Aluminum interior and exterior, stainless front
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSSSRRT
SSRS/SARS/SMRS Specification Line
Self-Contained Glass Door Shallow Reach-In Refrigerator
- SS Series : Stainless steel interior and exterior
- SA Series : Stainless steel exterior, aluminum interior
- SM Series : Aluminum interior and exterior, stainless front
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSSSRS-G
SSRS/SARS/SMRS Specification Line
Self-Contained Solid Door Shallow Reach-In Refrigerator
- SS Series : Stainless steel interior and exterior
- SA Series : Stainless steel exterior, aluminum interior
- SM Series : Aluminum interior and exterior, stainless front
Width : -
Depth : -
Height : -
Weight : -
Specification Sheet
DSSSRS
.jpg "ST4048")
ST4048
Self-contained compact work top refrigerators
- All ST4048 refrigerators feature Delfield's exclusive ABS interior. ABS is extremely durable - it won't dent, chip or corrode and is backed by a limited lifetime warranty.
- Units are constructed of stainless steel front, sides and top.
- All units use environmentally friendly R404A refrigerant.
Width : 48"
Depth : 285/16"
Height : 391/2"
Weight : 234 lb
Specification Sheet
DSST4000
ST4148
Self-contained compact work top freezer
- All ST4148 refrigerators feature Delfield's exclusive ABS interior. ABS is extremely durable - it won't dent, chip or corrode and is backed by a limited lifetime warranty.
- Units are constructed of stainless steel front, sides and top.
- All units use environmentally friendly R404A refrigerant.
Width : 48"
Depth : 285/16"
Height : 391/2"
Weight : 234 lb
Specification Sheet
DSST4000
ST4427N Mega Top
Front breathing self-contained mega-top refrigerated bases
- Patented air screen ensures product stays cold without drying it out
- All 4400 Series units are 100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up
- Durable, rugged stainless steel sides, top and front
Width : 271/8"
Depth : 311/2"
Height : 421/8"
Weight : -
Specification Sheet
DSST4427N-M
ST4427N, STD4427N
Self-contained Front-Breathing Flat Top Refrigerated Base
- Front Breathing : All 4400 Series units are 100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up
- Construction : Durable, rugged stainless steel sides, top and front
- ABS Interior : Features Delfield's exclusive ABS interior (on sides). ABS is extremely durable - it won't dent, chip or corrode and is backed by a limited lifetime warranty
Width : 271/8"
Depth : 311/2"
Height : 36"
Weight : -
Specification Sheet
DSST4427N
ST4432N, STD4432N
Self-contained Front-Breathing Flat Top Refrigerated Base
- Front Breathing : All 4400 Series units are 100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up
- Construction : Durable, rugged stainless steel sides, top and front
- ABS Interior : Features Delfield's exclusive ABS interior (on sides). ABS is extremely durable - it won't dent, chip or corrode and is backed by a limited lifetime warranty
Width : 321/8"
Depth : 311/2"
Height : 36"
Weight : -
Specification Sheet
DSST4432N
ST4448N, STD4448N
Self-contained Front-Breathing Flat Top Refrigerated Base
- Front Breathing : All 4400 Series units are 100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up
- Construction : Durable, rugged stainless steel sides, top and front
- ABS Interior : Features Delfield's exclusive ABS interior (on sides). ABS is extremely durable - it won't dent, chip or corrode and is backed by a limited lifetime warranty
Width : 481/8"
Depth : 311/2"
Height : 36"
Weight : -
Specification Sheet
DSST4448N
ST4448N-8, STD4448N-8
Front-Breathing Self-Contained Compact Salad Top Refrigerators
- Air screen : Patented air screen ensures product stays cold without drying it out.
- Front Breathing : All 4400 series units are 100% front breathing, whigh allows the unit to be pushed against a wall or built into a cabinet or an existing line up.
- Stainless steel top, sides and front : Durable, rugged stainless steel sides, top and front
Width : 481/8"
Depth : 311/2"
Height : 36"
Weight : -
Specification Sheet
DSST4448N-S
ST4460N, STD4460N
Self-contained Front-Breathing Flat Top Refrigerated Base
- Front Breathing : All 4400 Series units are 100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up
- Construction : Durable, rugged stainless steel sides, top and front
- ABS Interior : Features Delfield's exclusive ABS interior (on sides). ABS is extremely durable - it won't dent, chip or corrode and is backed by a limited lifetime warranty
Width : 601/8"
Depth : 311/2"
Height : 36"
Weight : -
Specification Sheet
DSST4460N
ST4460N-12M, STD4460N-12M, ST4460N-18M, STD4460N-18M
Front-Breathing Self-Contained Compact Mega Top Refrigerators
- Air screen : Patented air screen ensures product stays cold without drying it out.
- Front Breathing : All 4400 series units are 100% front breathing, whigh allows the unit to be pushed against a wall or built into a cabinet or an existing line up.
- Stainless steel top, sides and front : Durable, rugged stainless steel sides, top and front
Width : 601/8"
Depth : 311/2"
Height : 36"
Weight : -
Specification Sheet
DSST4460N-M
ST4460N-8, STD4460N-8
Front-Breathing Self-Contained Compact Salad Top Refrigerators
- Air screen : Patented air screen ensures product stays cold without drying it out.
- Front Breathing : All 4400 series units are 100% front breathing, whigh allows the unit to be pushed against a wall or built into a cabinet or an existing line up.
- Stainless steel top, sides and front : Durable, rugged stainless steel sides, top and front
Width : 601/8"
Depth : 311/2"
Height : 36"
Weight : -
Specification Sheet
DSST4460N-S
ST4464N, STD4464N
Self-contained Front-Breathing Flat Top Refrigerated Base
- Front Breathing : All 4400 Series units are 100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up
- Construction : Durable, rugged stainless steel sides, top and front
- ABS Interior : Features Delfield's exclusive ABS interior (on sides). ABS is extremely durable - it won't dent, chip or corrode and is backed by a limited lifetime warranty
Width : 641/8"
Depth : 311/2"
Height : 36"
Weight : -
Specification Sheet
DSST4464N
ST4472N, STD4472N
Self-contained Front-Breathing Flat Top Refrigerated Base
- Front Breathing : All 4400 Series units are 100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up
- Construction : Durable, rugged stainless steel sides, top and front
- ABS Interior : Features Delfield's exclusive ABS interior (on sides). ABS is extremely durable - it won't dent, chip or corrode and is backed by a limited lifetime warranty
Width : 721/8"
Depth : 311/2"
Height : 36"
Weight : -
Specification Sheet
DSST4472N
ST4472N-12, STD4472N-12
Front-Breathing Self-Contained Compact Salad Top Refrigerators
- Air screen : Patented air screen ensures product stays cold without drying it out.
- Front Breathing : All 4400 series units are 100% front breathing, whigh allows the unit to be pushed against a wall or built into a cabinet or an existing line up.
- Stainless steel top, sides and front : Durable, rugged stainless steel sides, top and front
Width : 721/8"
Depth : 311/2"
Height : 36"
Weight : -
Specification Sheet
DSST4472N-S
ST4472N-18M, STD4472N-18M, ST4472N-24M, STD4472N-24M
Front-Breathing Self-Contained Compact Mega Top Refrigerators
- Air screen : Patented air screen ensures product stays cold without drying it out.
- Front Breathing : All 4400 series units are 100% front breathing, whigh allows the unit to be pushed against a wall or built into a cabinet or an existing line up.
- Stainless steel top, sides and front : Durable, rugged stainless steel sides, top and front
Width : 721/8"
Depth : 311/2"
Height : 36"
Weight : -
Specification Sheet
DSST4472N-M
T, T2
Mobile enclosed tray and rack dispensers
- Platform : Dispenser platform carrier shall be 18-gauge stainless steel and shall be removable for cleaning.
- Extension Springs : Each dispenser shall be field adjustable by adding or removing stainless steel extension springs located inside the elevator housing.
- APPLIES TO T/T2-H HEATED DISPENSERS : Heated dispensers shall have a stainless steel liner separated from the outer panels by 2.00" (5.1cm) of fiberglass insulation. Unit shall be supplied with 9' (2.7m) cord and plug as shown in the specifications table on reverse. Electrical connections shall be 120 volt, 60 hertz, and single phase.
Width : 231/8"
Depth : 163/4"
Height : 36"
Weight : 150 lb
Specification Sheet
DST
T14D Blast Chiller/Shock Freezer
ConvoChill by Delfield
- Blast chill cycle : 154lb. chilling capacity - from 200 F to 38 F in approximately 90 minutes
- Shock freeze cycle : 120lb. freezing capacity - from 200 F to 0 F in approximately 240 minutes
- On board, integral printer : date, temperatures and times during all chilling cycles printed out
Width : 311/2"
Depth : 435/16"
Height : 7315/16"
Weight : 650 lb
Specification Sheet
DST14D
T40 Blast Chiller/Shock Freezer
ConvoChill by Delfield
- Blast chill cycle : 440lb. chilling capacity - from 200 F to 38 F in approximately 90 minutes
- Shock freeze cycle : 385lb. freezing capacity - from 200 F to 0 F in approximately 240 minutes
- On board, integral printer : date, temperatures and times during all chilling cycles printed out
Width : 61"
Depth : 5315/16"
Height : 891/2"
Weight : 850 lb
Specification Sheet
DST40
T5 Blast Chiller/Shock Freezer
ConvoChill by Delfield
- Blast chill cycle : 44lb. chilling capacity - from 200 F to 37 F in approximately 90 minutes
- Shock freeze cycle : 26lb. freezing capacity - from 200 F to 0 F in approximately 240 minutes
- On board, integral printer : date, temperatures and times during all chilling cycles printed out
Width : 311/2"
Depth : 279/16"
Height : 377/8"
Weight : 275 lb
Specification Sheet
DST5
TT, TT2 Shelleymatic
Mobile open frame/multi stack tray and rack dispensers
- Casters : Unit shall have four 4.00" (10.2cm) diameter polyolefin swivel casters (all locking), and non-marking gray bumpers at each corner.
- Platform : Dispenser platform carries shall be 18-gauge stainless steel and shall be removable for cleaning. Each dispenser shall have 2 self-leveling mechanisms.
- Self Leveling : Self-leveling mechanisms shall be field adjustable by adding or removing stainless steel extension springs located inside the elevator housing.
Width : 211/4"
Depth : 151/4"
Height : 36"
Weight : 100 lb
Specification Sheet
DSTT_TT2
UC, UCE Shelleymatic
Mobile tubular frame utility carts
- Vertical Frame : Vertical frame shall be integrally welded 16-gauge 1.00" (2.5cm) outside diameter stainless steel tubing, attached to a bottom frame of similar stainless steel tubing. Unit shall have (4) 4.00" (10.2cm) diameter polyolefin swivel casters (two locking), and a non-marking extruded vinyl sleeve bumper at each corner.
- APPLIES TO MODELS UC-2, UC-3 & UCE-1727 ONLY: : Shelves shall be one-piece molded fiberglass. Color of shelf should be specified on original order. Models UC-2 and UCE-1727 shall have (2) shelves; model UC-3 shall have (3) shelves.
- APPLIES TO MODLES UC-2SS, UC-3SS & UCE-1727SSS ONLY: : Shelves shall be 14-gauge stainless steel. Models UC-2ss and UCE-1727SS shall have (2) shelves; model UC-3SS shall have (3) shelves.
Width : 351/4"
Depth : 233/8"
Height : 353/4"
Weight : 115 lb
Specification Sheet
MSUC_E
UC4048
Self-Contained Undercounter Refrigerator
- ABS Interior : Features Delfield's exclusive ABS interior. ABS is extremely durable - it won't dent, chip or corrode and is backed by a limited lifetime warranty
- Construction : Stainless steel front, sides and top
- Refrigerant : Environmentally friendly R404A refrigerant
Width : 48"
Depth : 283/8"
Height : 351/2"
Weight : 236 lb
Specification Sheet
DSUC4000
UC4148
Self-Contained Undercounter Freezer
- ABS Interior : Features Delfield's exclusive ABS interior. ABS is extremely durable - it won't dent, chip or corrode and is backed by a limited lifetime warranty
- Construction : Stainless steel front, sides and top
- Refrigerant : Environmentally friendly R404A refrigerant
Width : 48"
Depth : 283/8"
Height : 351/2"
Weight : 236 lb
Specification Sheet
DSUC4000
UC4427N, UCD4427N Standard
Self-contained Front-Breathing Undercounter Refrigerated Base
- Front Breathing : All 4400 Series units are 100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up
- Construction : Durable, rugged stainless steel sides, top and front
- ABS Interior : Features Delfield's exclusive ABS interior (on sides). ABS is extremely durable - it won't dent, chip or corrode and is backed by a limited lifetime warranty
Width : 271/8"
Depth : 311/2"
Height : 341/4"
Weight : 220 lb
Specification Sheet
DSUC4427N
UC4427N-6, UCD4427N-6
Reduced Height Front-Breathing Self-Contained Compact Salad Top Refrigerators
- Air screen : Patented air screen ensures product stays cold without drying it out.
- Front Breathing : All 4400 series units are 100% front breathing, whigh allows the unit to be pushed against a wall or built into a cabinet or an existing line up.
- Stainless steel top, sides and front : Durable, rugged stainless steel sides, top and front
Width : 271/8"
Depth : 311/2"
Height : 341/4"
Weight : 240 lb
Specification Sheet
DSUC4427N-S
UC4427N-9M, UCD4427N-9M, UC4427N-12M, UCD4427N-12M
Reduced Height Front-Breathing Self-Contained Compact Mega Top Refrigerators
- Air screen : Patented air screen ensures product stays cold without drying it out.
- Front Breathing : All 4400 series units are 100% front breathing, whigh allows the unit to be pushed against a wall or built into a cabinet or an existing line up.
- Stainless steel top, sides and front : Durable, rugged stainless steel sides, top and front
Width : 271/8"
Depth : 311/2"
Height : 341/4"
Weight : 240 lb
Specification Sheet
DSUC4427N-M
UC4432N, UCD4432N Standard
Self-contained Front-Breathing Undercounter Refrigerated Base
- Front Breathing : All 4400 Series units are 100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up
- Construction : Durable, rugged stainless steel sides, top and front
- ABS Interior : Features Delfield's exclusive ABS interior (on sides). ABS is extremely durable - it won't dent, chip or corrode and is backed by a limited lifetime warranty
Width : 321/8"
Depth : 311/2"
Height : 341/4"
Weight : 280 lb
Specification Sheet
DSUC4432N
UC4432N-12M, UCD4432N-12M
Reduced Height Front-Breathing Self-Contained Compact Mega Top Refrigerators
- Air screen : Patented air screen ensures product stays cold without drying it out.
- Front Breathing : All 4400 series units are 100% front breathing, whigh allows the unit to be pushed against a wall or built into a cabinet or an existing line up.
- Stainless steel top, sides and front : Durable, rugged stainless steel sides, top and front
Width : 321/8"
Depth : 311/2"
Height : 341/4"
Weight : 315 lb
Specification Sheet
DSUC4432N-M
UC4448N, UCD4448N Standard
Self-contained Front-Breathing Undercounter Refrigerated Base
- Front Breathing : All 4400 Series units are 100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up
- Construction : Durable, rugged stainless steel sides, top and front
- ABS Interior : Features Delfield's exclusive ABS interior (on sides). ABS is extremely durable - it won't dent, chip or corrode and is backed by a limited lifetime warranty
Width : 481/8"
Depth : 311/2"
Height : 341/4"
Weight : 335 lb
Specification Sheet
DSUC4448N
UC4448N-18M, UCD4448N-18M
Reduced Height Front-Breathing Self-Contained Compact Mega Top Refrigerators
- Air screen : Patented air screen ensures product stays cold without drying it out.
- Front Breathing : All 4400 series units are 100% front breathing, whigh allows the unit to be pushed against a wall or built into a cabinet or an existing line up.
- Stainless steel top, sides and front : Durable, rugged stainless steel sides, top and front
Width : 481/8"
Depth : 311/2"
Height : 341/4"
Weight : 360 lb
Specification Sheet
DSUC4448N-M
UC4448N-8, UCD4448N-8, UC4448N-12, UCD4448N-12
Reduced Height Front-Breathing Self-Contained Compact Salad Top Refrigerators
- Air screen : Patented air screen ensures product stays cold without drying it out.
- Front Breathing : All 4400 series units are 100% front breathing, whigh allows the unit to be pushed against a wall or built into a cabinet or an existing line up.
- Stainless steel top, sides and front : Durable, rugged stainless steel sides, top and front
Width : 481/8"
Depth : 311/2"
Height : 341/4"
Weight : 320 lb
Specification Sheet
DSUC4448N-S
UC4460N, UCD4460N Standard
Self-contained Front-Breathing Undercounter Refrigerated Base
- Front Breathing : All 4400 Series units are 100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up
- Construction : Durable, rugged stainless steel sides, top and front
- ABS Interior : Features Delfield's exclusive ABS interior (on sides). ABS is extremely durable - it won't dent, chip or corrode and is backed by a limited lifetime warranty
Width : 601/8"
Depth : 311/2"
Height : 341/4"
Weight : 340 lb
Specification Sheet
DSUC4460N
UC4460N-12M, UCD4460N-12M, UC4460N-18M, UCD4460N-18M, UC4460N-24M, UCD4460N-24M
Front-Breathing Self-Contained Compact Mega Top Refrigerators
- Patented air screen ensures product stays cold without drying it out.
- All 4400 series units are 100% front breathing, whigh allows the unit to be pushed against a wall or built into a cabinet or an existing line up.
- Durable, rugged stainless steel sides, top and front
Width : 601/8"
Depth : 311/2"
Height : 341/4"
Weight : -
Specification Sheet
DSUC4460N-M
UC4460N-8, UCD4460N-8, UC4460N-12, UCD4460N-12
Reduced Height Front-Breathing Self-Contained Compact Salad Top Refrigerators
- Air screen : Patented air screen ensures product stays cold without drying it out.
- Front Breathing : All 4400 series units are 100% front breathing, whigh allows the unit to be pushed against a wall or built into a cabinet or an existing line up.
- Stainless steel top, sides and front : Durable, rugged stainless steel sides, top and front
Width : 601/8"
Depth : 311/2"
Height : 341/4"
Weight : 345 lb
Specification Sheet
DSUC4460N-S
UC4464N, UCD4464N Standard
Self-contained Front-Breathing Undercounter Refrigerated Base
- Front Breathing : All 4400 Series units are 100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up
- Construction : Durable, rugged stainless steel sides, top and front
- ABS Interior : Features Delfield's exclusive ABS interior (on sides). ABS is extremely durable - it won't dent, chip or corrode and is backed by a limited lifetime warranty
Width : 641/8"
Depth : 311/2"
Height : 341/4"
Weight : 395 lb
Specification Sheet
DSUC4464N
UC4464N-12M, UCD4464N-12M, UC4464N-18M, UCD4464N-18M, UC4464N-24M, UCD4464N-24M
Reduced Height Front-Breathing Self-Contained Compact Mega Top Refrigerators
- Air screen : Patented air screen ensures product stays cold without drying it out.
- Front Breathing : All 4400 series units are 100% front breathing, whigh allows the unit to be pushed against a wall or built into a cabinet or an existing line up.
- Stainless steel top, sides and front : Durable, rugged stainless steel sides, top and front
Width : 641/8"
Depth : 311/2"
Height : 341/4"
Weight : 435 lb
Specification Sheet
DSUC4464N-M
UC4464N-8, UCD4464N-8, UC4464N-12, UCD4464N-12, UC4464N-16, UCD4464N-16
Reduced Height Front-Breathing Self-Contained Compact Salad Top Refrigerators
- Air screen : Patented air screen ensures product stays cold without drying it out.
- Front Breathing : All 4400 series units are 100% front breathing, whigh allows the unit to be pushed against a wall or built into a cabinet or an existing line up.
- Stainless steel top, sides and front : Durable, rugged stainless steel sides, top and front
Width : 641/8"
Depth : 311/2"
Height : 341/4"
Weight : 446 lb
Specification Sheet
DSUC4464N-S
UC4472N, UCD4472N Standard
Self-contained Front-Breathing Undercounter Refrigerated Base
- Front Breathing : All 4400 Series units are 100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up
- Construction : Durable, rugged stainless steel sides, top and front
- ABS Interior : Features Delfield's exclusive ABS interior (on sides). ABS is extremely durable - it won't dent, chip or corrode and is backed by a limited lifetime warranty
Width : 721/8"
Depth : 311/2"
Height : 341/4"
Weight : 485 lb
Specification Sheet
DSUC4472N
UC4472N-12, UCD4472N-12, UC4472NN-18, UCD4472N-18
Reduced Height Front-Breathing Self-Contained Compact Salad Top Refrigerators
- Air screen : Patented air screen ensures product stays cold without drying it out.
- Front Breathing : All 4400 series units are 100% front breathing, whigh allows the unit to be pushed against a wall or built into a cabinet or an existing line up.
- Stainless steel top, sides and front : Durable, rugged stainless steel sides, top and front
Width : 721/8"
Depth : 311/2"
Height : 341/4"
Weight : 485 lb
Specification Sheet
DSUC4472N-S
UC4472N-18M, UCD4472N-18M, UC4472N-24M, UCD4472N-24M, UC4472N-30M, UCD4472N-30M
Reduced Height Front-Breathing Self-Contained Compact Mega Top Refrigerators
- Air screen : Patented air screen ensures product stays cold without drying it out.
- Front Breathing : All 4400 series units are 100% front breathing, whigh allows the unit to be pushed against a wall or built into a cabinet or an existing line up.
- Stainless steel top, sides and front : Durable, rugged stainless steel sides, top and front
Width : 721/8"
Depth : 311/2"
Height : 341/4"
Weight : 485 lb
Specification Sheet
DSUC4472N-M
UC4532N, UCD4532N Standard
Self-contained Front-Breathing Undercounter Freezer Base
- Front Breathing : All 4400 Series units are 100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up
- Construction : Durable, rugged stainless steel sides, top and front
- ABS Interior : Features Delfield's exclusive ABS interior (on sides). ABS is extremely durable - it won't dent, chip or corrode and is backed by a limited lifetime warranty
Width : 321/8"
Depth : 311/2"
Height : 341/4"
Weight : 280 lb
Specification Sheet
DSUC4532N
UC4560N
Self-contained Front-Breathing Undercounter Freezer Base
- Front Breathing : All 4400 Series units are 100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up
- Construction : Durable, rugged stainless steel sides, top and front
- ABS Interior : Features Delfield's exclusive ABS interior (on sides). ABS is extremely durable - it won't dent, chip or corrode and is backed by a limited lifetime warranty
Width : 601/8"
Depth : 311/2"
Height : 341/4"
Weight : 340 lb
Specification Sheet
DSUC4560N
UTS Shelleymatic
Mobile tubular frame tray & silver carts with cylinders
- Silverware Bin : Silverware bin shall be stainless steel, welded and polished, with (10) round cutouts to accept (10) plastic silverware cylinders (provided).
- APPLIES TO MODELS UTS-1 ONLY: : Shelf shall be one-piece molded fiberglass. Color of shelf should be specified on original order.
- APPLIES TO MODELS UTS-1SS ONLY: : Shelf shall be 14-gauge stainless steel.
Width : 351/4"
Depth : 233/8"
Height : 4611/16"
Weight : 120 lb
Specification Sheet
MSUTS
UTSP Shelleymatic
Mobile tubular frame tray & silver carts with pans
- Silverware Bin : Each silverware bin shall be stainless steel, welded and polished, with a rectangular cutout to accept (4) 14-size 22-gauge stainless steel pans (provided). Model UTSP-1 has (1) silverware bin with (4) pans; model UTSP-2 has (2) silverware bins with (8) pans.
- APPLIES TO MODELS UTSP-1 & UTSP-2 ONLY: : Shelf shall be one-piece molded fiberglass. Color of shelf should be specified on original order.
- THE FOLLOWING APPLIES TO MODELS UTSP-1SS & UTSP-2SS ONLY: : Shelf shall be 14-gauge stainless steel.
Width : 351/4"
Depth : 233/8"
Height : 605/8"
Weight : 125 lb
Specification Sheet
MSUTSP